1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer C5
    5. /
  5. 27
Page 131 / 141 Scroll up to view Page 126 - 130
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 120 -
4.22 Logout
Click the
Logout
tab at the bottom of the main menu, and then the web-page will be logged out
and return to the login window.
Page 132 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 121 -
Appendix A: FAQ
1.
How do I configure the router to access Internet by ADSL users?
1)
First, configure the ADSL Modem configured in RFC1483 bridge model.
2)
Connect the Ethernet cable from your ADSL Modem to the Internet port on the router.
The telephone cord plugs into the Line port of the ADSL Modem.
3)
Login to the router, click the “Network” menu on the left of your browser, and click "WAN"
submenu. On the WAN page, select “PPPoE/Russia PPPoE” for WAN Connection Type.
Type user name in the “User Name” field and password in the “Password” field, type
password in the “Confirm Password” field again, finish by clicking “Connect”.
Figure A-1 PPPoE Connection Type
4)
If your ADSL lease is in “pay-according-time” mode, select “Connect on Demand” or
“Connect Manually” for Internet connection mode. Type an appropriate number for “Max
Idle Time” to avoid wasting paid time. Otherwise, you can select “Auto-connecting” for
Internet connection mode.
Figure A-2 PPPoE Connection Mode
Note:
1.
Sometimes the connection cannot be disconnected although you specify a time to Max
Idle Time, since some applications is visiting the Internet continually in the background.
2.
If you are a Cable user, please configure the router following the above steps.
Page 133 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 122 -
2.
How do I configure the router to access Internet by Ethernet users?
1)
Login to the router, click the “Network” menu on the left of your browser, and click "WAN"
submenu. On the WAN page, select “Dynamic IP” for "WAN Connection Type", finish by
clicking “Save”.
2)
Some ISPs require that you register the MAC Address of your adapter, which is
connected to your cable/DSL Modem during installation. If your ISP requires MAC
register, login to the router and click the "Network" menu link on the left of your browser,
and then click "MAC Clone" submenu link. On the "MAC Clone" page, if your PC’s MAC
address is proper MAC address, click the "Clone MAC Address" button and your PC’s
MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address
into
the
"WAN
MAC
Address"
field.
The
format
for
the
MAC
Address
is
XX-XX-XX-XX-XX-XX. Then click the "Save" button. It will take effect after rebooting.
Figure A-3 MAC Clone
3.
I want to use Netmeeting, what do I need to do?
1)
If you start Netmeeting as a host, you don’t need to do anything with the router.
2)
If you start as a response, you need to configure Virtual Server or DMZ Host and make
sure the H323 ALG is enabled.
3)
How to configure Virtual Server: Log in to the router, click the “
Forwarding
” menu on the
left of your browser, and click "
Virtual Servers
" submenu. On the "
Virtual Servers
"
page, click
Add New…
. Then on the “
Add or Modify a Virtual Server Entry
” page,
enter “1720” for the “Service Port” blank, and your IP address for the “IP Address” blank,
taking 192.168.0.169 for an example, remember to
select the Status to be
Enabled
and
Save
.
Figure A-4 Virtual Servers
Page 134 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 123 -
Figure A-5 Add or Modify a Virtual server Entry
Note:
Your opposite side should call your WAN IP, which is displayed on the “Status” page.
4)
How to enable DMZ Host: Log in to the router, click the “
Forwarding
” menu on the left of
your browser, and click "
DMZ
" submenu. On the "DMZ" page, click
Enable
radio button
and type your IP address into the “DMZ Host IP Address” field, using 192.168.0.169 as
an example, remember to click the
Save
button.
Figure A-6 DMZ
5)
How to enable H323 ALG: Log in to the router, click the “
Security
” menu on the left of
your browser, and click “
Basic Security
” submenu. On the “
Basic Security
” page,
check the
Enable
radio button next to
H323 ALG
. Remember to click the
Save
button.
Page 135 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 124 -
Figure A-7 Basic Security
4.
I want to build a WEB Server on the LAN, what should I do?
1)
Because the WEB Server port 80 will interfere with the WEB management port 80 on the
router, you must change the WEB management port number to avoid interference.
2)
To change the WEB management port number: Log in to the router, click the “
Security
”
menu on the left of your browser, and click "
Remote Management
" submenu. On the
"
Remote Management
" page, type a port number except 80, such as 88, into the "Web
Management Port" field. Click
Save
and reboot the router.
Figure A-8 Remote Management
Note:
If the above configuration takes effect, you can visit and configure the router by typing
(the router’s LAN IP address: Web Management Port) in the address
field of the Web browser. If the LAN IP of the modem connected with your router is
192.168.0.x, the default LAN IP of the router will automatically switch from 192.168.0.1 to
192.168.1.1 to avoid IP conflict; in this case, please try
.

Rate

4 / 5 based on 1 vote.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top