Page 111 / 141
Scroll up to view Page 106 - 110
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 100 -
Figure 4-101 Comexe.cn DDNS Settings
To set up for DDNS, follow these instructions:
1.
Enter the
Domain Name
your dynamic DNS service provider gave.
2.
Enter the
User Name
for your DDNS account.
3.
Enter the
Password
for your DDNS account.
4.
Click the
Login
button to login the DDNS service.
Connection Status -
The status of the DDNS service connection is displayed here.
Click
Logout
to log out of the DDNS service.
Note:
If you want to login again with another account after a successful login, please click the
Logout
button, then input your new username and password and click the
Login
button.
4.19.2
Dyndns DDNS
If the dynamic DNS
Service Provider
you select is
www.dyndns.
com
, the page will appear as
shown in Figure 4-102.
Page 112 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 101 -
Figure 4-102 Dyndns.org DDNS Settings
To set up for DDNS, follow these instructions:
1.
Enter the
User Name
for your DDNS account.
2.
Enter the
Password
for your DDNS account.
3.
Enter the
Domain Name
you received from dynamic DNS service provider.
4.
Click the
Login
button to login to the DDNS service.
Connection Status -
The status of the DDNS service connection is displayed here.
Click
Logout
to logout of the DDNS service.
Note:
If you want to login again with another account after a successful login, please click the
Logout
button, then input your new username and password and click the
Login
button.
4.19.3
No-IP DDNS
If the dynamic DNS
Service Provider
you select is
www.no-ip.com
, the page will appear as
shown in Figure 4-103.
Page 113 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 102 -
Figure 4-103 No-ip.com DDNS Settings
To set up for DDNS, follow these instructions:
1.
Enter the
User Name
for your DDNS account.
2.
Enter the
Password
for your DDNS account.
3.
Enter the
Domain Name
you received from dynamic DNS service provider.
4.
Click the
Login
button to login to the DDNS service.
Connection Status -
The status of the DDNS service connection is displayed here.
Click
Logout
to log out the DDNS service.
Note:
If you want to login again with another account after a successful login, please click the
Logout
button, then input your new username and password and click the
Login
button.
4.20 IPv6 Support
Figure 4-104 IPv6 Support
There are two submenus under the IPv6 Support menu (shown in Figure 4-104):
IPv6 Status
and
IPv6 Setup
. Click either of them, and you will be able to scan or configure the corresponding
function. The detailed explanations for each submenu are provided below.
Page 114 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 103 -
4.20.1 IPv6 Status
Figure 4-105 IPv6 Status
The
IPv6 Status
page displays the router's current IPv6 status and configuration. All information
is read-only.
WAN
Connection Type
- The IPv6 connection way for WAN
IPv6 Address
- The WAN IPv6 address
IPv6 Default Gateway
- The router's default gateway
Primary IPv6 DNS
- The primary IPv6 DNS address
Secondary IPv6 DNS
- The secondary IPv6 DNS address
LAN
IPv6 Address Assign Type
- There are two types of assignation for IPv6 address:
SLAAC
(Stateless
address
auto-configuration)
and
DHCPv6
(Dynamic
Host
Configuration Protocol for IPv6) Server.
SLAAC
IPv6 Address Prefix
-The Prefix of IPv6 Address
DHCPv6 Server
Release Time
-
the length of time a network user will be allowed to keep connecting
to the router with the current DHCPv6 Address. Enter the amount of time (in
seconds) that the DHCPv6 address will be leased. The time range is 1~691200
seconds. The default value is 86400 seconds.
IPv6 Address
- Displays the LAN IPv6 Address.
Page 115 / 141
Archer C5
AC1200 Wireless Dual Band Gigabit Router
- 104 -
4.20.2 IPv6 Setup
Figure 4-106 Enable/Disable IPv6
Enable IPv6
- Tick the checkbox to enable the IPv6 function. It’s enabled by default.
WAN Connection Type
- Choose the correct WAN connection type based on your ISP
network topology.
DHCPv6
- Connections which use dynamic IPv6 address assignment.
Static IPv6
- Connections which use static IPv6 address assignment.
PPPoEv6
- Connections which use PPPoEV6 that requires a user name and password.
Tunnel 6to4
- Connections which use 6to4 address assignment.
Different types of WAN connection require you to do different settings. Below are the detailed
explanations for the respective type.
19216811.live