TP-Link Archer C2 Router Manual PDF (Setup & Configuration Guide)

Page 111 / 143 Scroll up to view Page 106 - 110

Archer C2

AC750 Wireless Dual Band Gigabit Router

- 101 -

1.

Click

Add New

shown in Figure 4-91, you will see a new screen shown in Figure 4-92.

2.

Enter the information like the screen shown below.

Figure 4-92 Bandwidth Control Rule Settings

3.

Click the

Save

button.

4.18 IP & MAC Binding

Figure 4-93 the IP & MAC Binding menu

There are two submenus under the IP &MAC Binding menu (shown in Figure 4-93):

Binding

Settings

and

ARP List

. Click any of them, and you will be able to

scan or configure the

corresponding function. The detailed explanations for each submenu are provided below.

4.18.1

Binding Settings

This page displays the

IP & MAC Binding Setting

table; you can operate it in accord with your

desire (shown in

Figure 4-94).

Figure 4-94 Binding Setting

Page 112 / 143

Archer C2

AC750 Wireless Dual Band Gigabit Router

- 102 -



MAC Address

-

The MAC address of the controlled computer in the LAN.



IP Address -

The assigned IP address of the controlled computer in the LAN.



Bind

-

Check this option to enable ARP binding for a specific device.



Edit

-

To edit or delete an existing entry.

When you want to add or modify an IP & MAC Binding entry, you can click the

Add New

button

or

Edit

button, and then you will go to the next page. This page is used for adding or modifying

an IP & MAC Binding entry

(shown in Figure 4-95).

Figure 4-95 IP & MAC Binding Setting (Add & Modify)

To add IP & MAC Binding entries, follow the steps below.

1.

Click the

Add New

button as shown in Figure 4-94.

2.

Enter the MAC Address and IP Address.

3.

Select the Bind checkbox.

4.

Click the

Save

button to save it.

To modify or delete an existing entry, follow the steps below.

1.

Find the desired entry in the table.

2.

Click

Edit

or

Delete

as desired on the

Edit

column.

4.18.2

ARP List

To manage the computer, you could observe the computers in the LAN by checking the

relationship of MAC address and IP address on the ARP list, and you could also configure the

items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding

entries (shown in Figure 4-96).

Page 113 / 143

Archer C2

AC750 Wireless Dual Band Gigabit Router

- 103 -

Figure 4-96 ARP List

1.

MAC Address

-

The MAC address of the controlled computer in the LAN.

2.

IP Address

-

The assigned IP address of the controlled computer in the LAN.

3.

Status

-

Indicates whether or not the MAC and IP addresses are bound.

Click the

Load Selected

button to load the selected items to the IP & MAC Binding list.

Click the

Delete Selected

button to delete the selected items to the IP & MAC Binding list.

Click the

Refresh

button to refresh all items.



Note:

An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been

loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without

interference to the IP & MAC Binding list.

4.19 Dynamic DNS

Choose menu “

Dynamic DNS

”, and you can configure the Dynamic DNS function.

The router offers the

DDNS

(Dynamic Domain Name System) feature, which allows the hosting of

a website, FTP server, or e-mail server with a fixed domain name (named by yourself) and a

dynamic IP address, and then your friends can connect to your server by entering your domain

name no matter what your IP address is. Before using this feature, you need to sign up for DDNS

service providers such as

www.comexe.cn

,

www.dyndns.org

, or

www.no-ip.com

. The Dynamic

DNS client service provider will give you a password or key.

4.19.1

No-ip.com DDNS

If the dynamic DNS

Service Provider

you select is

www.no-ip.com

, the page will appear as

shown in. Figure 4-97

Page 114 / 143

Archer C2

AC750 Wireless Dual Band Gigabit Router

- 104 -

Figure 4-97 No-ip.com DDNS Settings

To set up for DDNS, follow these instructions:

1.

Enter the

Domain Name

you received from dynamic DNS service provider.

2.

Enter the

UserName

for your DDNS account.

3.

Enter the

Password

for your DDNS account.

4.

Enable DDNS.

5.

Click the

Login

button to login to the DDNS service.

Connection Status -

The status of the DDNS service connection is displayed here.

Click

Logout

to log out the DDNS service.



Note:

If you want to login again with another account after a successful login, please click the

Logout

button, then input your new username and password and click the

Login

button.

4.19.2

Comexe.cn DDNS

If the dynamic DNS

Service Provider

you select is

www.comexe.cn

, the page will appear as

shown in Figure 4-98.

Page 115 / 143

Archer C2

AC750 Wireless Dual Band Gigabit Router

- 105 -

Figure 4-98 Comexe.cn DDNS Settings

To set up for DDNS, follow these instructions:

1.

Enter the

Domain Name

your dynamic DNS service provider gave.

2.

Enter the

UserName

for your DDNS account.

3.

Enter the

Password

for your DDNS account.

4.

Enable DDNS.

5.

Click the

Login

button to login the DDNS service.

Connection Status -

The status of the DDNS service connection is displayed here.

Click

Logout

to log out of the DDNS service.



Note:

If you want to login again with another account after a successful login, please click the

Logout

button, then input your new username and password and click the

Login

button.

4.19.3

Dyndns.org DDNS

If the dynamic DNS

Service Provider

you select is

www.dyndns.org

, the page will appear as

shown in Figure 4-99.

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share