Page 101 / 143
Scroll up to view Page 96 - 100
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 91 -
4.
Click the submenu
Target of Access Control
in the left to enter the Target List page. Add a
new entry with the Target Description is Target_1 and Domain Name is www.google.com.
5.
Click the submenu
Schedule of Access Control
in the left to enter the Schedule List page.
Add a new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start
Time is 1800 and Stop Time is 2000.
6.
Click the submenu
Rule of Access Control
in the left, Click
Add New
button to add a new
rule as follows:
1)
In Rule Name field, create a name for the rule. Note that this name should be unique, for
example Rule_1.
2)
In Host field, select Host_1.
3)
In Target field, select Target_1.
4)
In Schedule field, select Schedule_1.
5)
In Status field, select
Enabled
.
6)
Click
Save
to complete the settings.
Then you will go back to the Access Control Rule Management page and see the following list.
4.15.2
Host
Choose menu “
Access Control
→
Host
”, and then you can view and set a Host list in the
screen as shown in Figure 4-78. The host list is necessary for the Access Control Rule.
Figure 4-78 Host Settings
Description -
Here displays the description of the host and this description is unique.
Page 102 / 143
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 92 -
Address Info -
Here displays the information about the host. It can be IP or MAC.
Edit -
To modify or delete an existing entry.
Click the
Delete Selected
button to delete the selected entries in the table.
To add a new entry, please follow the steps below.
1.
Click the
Add New
button.
2.
In the
Mode
field, select IP Address or MAC Address.
1)
If you select IP Address, the screen shown is Figure 4-79.
In
Description
field, create a unique description for the host (e.g. Host_1).
In
IP Address
field, enter the IP address.
2)
If you select MAC Address, the screen shown is Figure 4-80.
In
Description
field, create a unique description for the host (e.g. Host_1).
In
MAC Address
field, enter the MAC address.
3.
Click the
Save
button to complete the settings.
Figure 4-79 Add or Modify a Host Entry
Figure 4-80 Add or Modify a Host Entry
For example
: If you desire to restrict the internet activities of host with MAC address
00:11:22:33:44:AA, you should first follow the settings below:
Page 103 / 143
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 93 -
1.
Click
Add New
button in Figure 4-78 to enter the Add or Modify a Host Entry page.
2.
In
Mode
field, select MAC Address from the drop-down list.
3.
In
Description
field, create a
unique
description for the host (e.g. Host_1).
4.
In
MAC Address
field, enter 00:11:22:33:44:AA.
5.
Click
Save
to complete the settings.
Then you will go back to the Host Settings page and see the following list.
4.15.3
Target
Choose menu “
Access Control
→
Target
”, and then you can view and set a Target list in the
screen as shown in Figure 4-81. The target list is necessary for the Access Control Rule.
Figure 4-81 Target Settings
Description -
Here displays the description about the target and this description is unique.
Details -
The target can be IP address, port, or domain name.
Edit-
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New
button.
2.
In Mode field, select
IP Address
,
MAC Address
or
URL Address
.
1
）
If you select
IP Address
, the screen shown is Figure 4-82.
Page 104 / 143
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 94 -
Figure 4-82 Add or Modify an Access Target Entry
I)
In
Description
field, create a unique description for the target (e.g. Target_1).
II)
In
IP Address
field, enter the IP address of the target.
III)
Specify the
Target Port
manually.
2
）
If you select
MAC Address
, the screen shown is Figure 4-82.
Figure 4-83 Add or Modify an Access Target Entry
I)
In
Description
field, create a unique description for the target (e.g. Target_1).
II)
In
IP Address
field, enter the IP address of the target.
III)
Specify the
Target Port
manually.
3
）
If you select
URL Address
, the screen shown is Figure 4-84.
Page 105 / 143
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 95 -
Figure 4-84 Add or Modify an Access Target Entry
I)
In
Description
field, create a unique description for the target (e.g. Target_1).
II)
In
Add
URL Address
field, enter the domain name, either the full name or the
keywords (for example, google) in the blank. Any domain name with keywords in it
(www.google.com, www.google.cn) will be blocked or allowed. Click
Add
to save the
address,
3.
Click the
Save
button.
Click the
Delete Selected
button to delete the selected entries in the table.
For example
: If you desire to restrict the internet activities of host with MAC address
00:11:22:33:44:AA in the LAN to access
www.google.com
only, you should first follow the
settings below:
1.
Click
Add New
button in Figure 4-81 to enter the Add or Modify an Access Target Entry page.
2.
In
Mode
field, select
URL Address
from the drop-down list.
3.
In
Description
field, create a unique description for the target (e.g. Target_1).
4.
In
Add
URL Address
field, enter www.google.com. And then click
Add
to save the entry.
5.
Click
Save
to complete the settings.
Then you will go back to the Target Settings page and see the following list.
19216811.live