Page 26 / 32
Scroll up to view Page 21 - 25
- 24 -
4.5.3 WOL
Users can use this Wake On Line function to start the PC remotely.
4.5.4 Host Scan
It facilitates the user to view the working status of the PC, including status of ICMP, ARP
package sending and receiving, and TCP port communication information.
4.6 Traffic
Click "Traffic" menu, you will see:
or
Page 27 / 32
- 25 -
4.6.1 QoS Setup
Do not allow to use radix point, ex: 2.5Mbps -25000kbps.
You can choose this as user defined rule or predefined rule
IP addresses can be a single IP address; also can be set to an IP address segment.
4.6.2 Connection Info
It indicates the present connection information of the wireless router in graphic and digital,
data package sending and receiving status of each PC in connection.
4.6.3 Connection Control
Connection Control shows the Max connection, Max UDP connection, Max ICMP
connection, and Max connection per PC. These settings are only for advanced users,
common users are not recommended to change them.
Page 29 / 32
- 27 -
4.6.5 Port Rate Control
4.6.6 Switch Setup
You can send a copy of network packets seen on one LAN port to a network monitoring
connection on another LAN port. At the same time, the send port can not transmit data.
This is commonly used for network appliances that require monitoring of network traffic,
such as an intrusion-detection system.
4.7 System
Click "System" menu, you will see:
4.7.1 System Log
System Log shows the working status of the wireless router, the user can check the
running status information at here.
Page 30 / 32
- 28 -
4.7.2 Admin Setup
Here you can change login account name and password, and administrator email
information.
Firstly please input your old ID and password, and then input your expected new ones. If
you input your old ID and password correctly, then click
“Apply”
to change it.
19216811.live