Page 6 / 21
Scroll up to view Page 1 - 5
7.
Splitter
Interface
Introduction
LINE
Connected with telephone line.
ADSL
Connect with the LINE port of the Modem by telephone line
provided.
PHONE
Connect with telephone.
8. LED Status Indication
Status
ON
Flashing
Fast Blinking
OFF
Power
Normal Operation
-
-
Power not applied
DSL
DSL line is
trained
DSL is training
DSL is transforming
data
DSL line not Connected
INTERNET
Internet
Connection
-
-
No Internet not
Connection
LAN
Ethernet is
connected
-
Ethernet traffic is
flowing
Ethernet is not
connected;
Wrong type of Ethernet
cable used
Page 7 / 21
9. Configure your PC’s Network parameters.
9.1
In case of Windows 98 /ME/ 2000, click the Start button, point to
Settings
, and then
click
Control Panel
. Double-click the Network and Dial-up Connections icon. Select
Internet Protocol (TCP/IP)
, and then click
Properties
. Click the radio button labeled
Obtain an IP address automatically
. Also click the radio button labeled
Obtain DNS
server address automatically
. Click
OK
to confirm.
9.2
In case of Windows XP, click the Start button, and then click
Control Panel
. Double-
click the Network Connections icon.
9.3
For Windows XP®. Follow the instructions presented on the figures below
1) Right-click the
Local Area Connection icon
Right Click
Page 8 / 21
2) Select
Properties
3) Select
Internet Protocol (TCP/IP)
, and then click
Properties
.
Select Properties
Select (TCP/IP)
Click Properties
Page 9 / 21
4) Click the radio button labeled
Obtain an IP address automatically
. Also click
the radio button labeled
Obtain DNS server address automatically
. Click
OK
to confirm.
5) Click the radio button labeled
Show icon
, and then click
OK
to save.
1. Click Obtain an IP address
automatically
2. Click Obtain DNS server address
automatically
3. Click OK
1. Click Show icon
2. Click OK
Page 10 / 21
9.4
After complete these instructions and turn on your ADSL modem, you will
found the icon on the status bar as the figure below:, figure a) LAN cable
connected correctly or figure b) LAN cable connected incorrectly
Figure
a)
LAN cable is connected correctly
Figure
b)
LAN cable is connected incorrectly
Icon shows that LAN cable
is connected correctly
Icon shows that LAN cable
is connected incorrectly
19216811.live