Page 21 / 27
Scroll up to view Page 16 - 20
20
Tilgin HG2300 series Quick Guide
14.2 Wall Mount
If you want to mount your product on a wall
1.
Use the foot stand/wall bracket to mark the drill holes. Fig 3.
The wall bracket is used both for wall mounting and as a foot stand.
2.
When you have marked the drill locations on your wall, drill two holes
and mount the wall bracket with two suitable screws. Fig 3
3.
Connect the cables to the ports on the rear panel. Fig 4
4.
Hang the device on the foot stand/wall bracket hooks. Fig 5 and Fig 6
Fig. 3
Tilgin WEB version of Quick guide can deviate from version supplied by operator
Page 22 / 27
21
Tilgin HG2300 series Quick Guide
Fig. 4
Fig. 5
Tilgin WEB version of Quick guide can deviate from version supplied by operator
Page 23 / 27
22
Tilgin HG2300 series Quick Guide
Fig. 6
Tilgin WEB version of Quick guide can deviate from version supplied by operator
Page 24 / 27
23
Tilgin HG2300 series Quick Guide
15
Used Acronyms
DHCP
Dynamic Host Configuration Protocol
GUI
Graphical User Interface
LAN
LED
PBC Method
Local Area Network
Light Emitting Diod
Push Button Connect method
SSID
Service Set Identifier
VoIP
WAN
Voice over IP
Wide Area Network
Wi-Fi
WLAN
Trademark for Wi-Fi Alliance
Wireless Local Area Network
WPA
Wi-Fi Protected Access
WPS
Wi-Fi Protected Setup
Tilgin WEB version of Quick guide can deviate from version supplied by operator
Page 25 / 27
24
Empty page
Tilgin WEB version of Quick guide can deviate from version supplied by operator
19216811.live