1. Home
    2. /
  2. Manuals
    3. /
  3. Tilgin
    4. /
  4. HG2301
    5. /
  5. 4
Page 16 / 27 Scroll up to view Page 11 - 15
14
Tilgin HG2300 series Quick Guide
8
Power Supply
Do not use any other power supply than the one delivered by Tilgin. Using the
wrong power supply could be hazardous to you or the product.
The power supply is approved by one or more of the following safety
organizations:
Tilgin WEB version of Quick guide can deviate from version supplied by operator
Page 17 / 27
16
Tilgin HG2300 series Quick Guide
9
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CAUTION: Change or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this
device could void the user's authority to operate the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provided with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure compliance."
Tilgin WEB version of Quick guide can deviate from version supplied by operator
Page 18 / 27
17
Tilgin HG2300 series Quick Guide
10
Technical Specifications
Max dimension incl. foot
BxHxD = 240x175x82 mm
Max dimension excl. foot
BxHxD = 220x175x65 mm
Weight
0.6 kilograms
Operating voltage
See the supplied power adapter
Operating frequency
See the supplied power adapter
Temperature
Operating
0°C to 40°C
32°F to 104°F
Non-
operating:
-20°C to 60°C
-4°F
to 140°F
Humidity (relative, non-
condensing)
Operating
10% to 90%,
Non-
operating
5% to 95%
11
Environmental Information
The equipment you purchased has required the extraction and use of natural
resources for its production. It may contain substances that are hazardous to
your health and to the environment. To avoid putting such substances into our
environment and to reduce pressure on our natural resources, we ask that you
reuse or recycle your end-life equipment by using an accredited electronics
take-back system.
The symbols below indicate that this product should be reused or recycled and
not simply discarded. Please locate and use an appropriate reuse and recycling
site. If you need more information on collection, reuse and recycling systems,
contact your local or regional waste administration. You may also contact your
operator for more information on the environmental performances of these
products.
Power Saver Reminder
If not using WLAN it is recommended to shut it down by pushing the ECO mode
button (#1) (OFF).
Tilgin WEB version of Quick guide can deviate from version supplied by operator
Page 19 / 27
18
Tilgin HG2300 series Quick Guide
12
Warranty
No warranty, express or implied, with respect to the product is extended directly
to you from or on behalf of Tilgin IPRG AB. Limited warranties may be granted
to you by the equipment provider in its capacity as reseller of the product.
Please contact your equipment provider for information regarding warranties for
the product.
13
Notice of Copyright and Patent Protection
This product incorporates technology, which is copyrighted, patented, or
otherwise protected under intellectual property laws and treaties and proprietary
to
Tilgin IPRG AB
or Tilgin’s third party licensors. All use of the products is
subject to the applicable End User License Terms and Conditions provided in
conjunction with the product.
Tilgin WEB version of Quick guide can deviate from version supplied by operator
Page 20 / 27
19
Tilgin HG2300 series Quick Guide
14
How to Mount the Home Gateway
14.1 Desk Top Mount
If you want to have the home gateway standing on a level surface
1.
Connect the cables.
2.
Arrange the cables and fix them under the hooks
3.
Put the foot stand/wall bracket on a level surface
4.
Place the device on the foot stand/wall bracket on the slot Fig 1
5.
Snap the home gateway in the slots Fig 2
Fig. 1
Fig. 2
Tilgin WEB version of Quick guide can deviate from version supplied by operator

Rate

3.5 / 5 based on 2 votes.

Popular Tilgin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top