Page 36 / 90
Scroll up to view Page 31 - 35
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
32
Fig. 12
6.
6.
6.
6. Initial Scan
Initial Scan
Initial Scan
Initial Scan
To speed up the modem’s first time startup, enter known downstream frequency and/or upstream
channel ID information here. Then click “
Apply and Reboot
” button to start scanning the cable
network beginning with the values supplied here.
The value is provided in Hertz. So for 562 MHz, you must type: 562000000
Page 37 / 90
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
33
Fig. 13
7 Backup/Restore
7 Backup/Restore
7 Backup/Restore
7 Backup/Restore
Backup/Restore Settings
:
This page allows you to save your current settings locally on your PC, or
restored settings previously saved.The file name is “GatewaySettings.bin”.
Fig 14
Page 38 / 90
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
34
Gateway
Gateway
Gateway
Gateway – Network
Network
Network
Network Web Page Group
Web Page Group
Web Page Group
Web Page Group
1. LA
1. LA
1. LA
1. LAN
You can activate the DHCP server function for the LAN on this page.
With this activated function,
•
your cable company’s DHCP server provides one IP address for your gateway,
•
and your gateway’s DHCP server provides IP addresses, starting at the address you set in IP
Address on the LAN page, to your PCs. A DHCP server leases an IP address with an expiration
time.
To change the lowest IP address that your gateway will issue to your PCs, enter it into the
IP Address
box and then click
Apply
.
IP Address and Subnet Mask:
A private IP address and Subnet Mask for LAN sub netting.
DHCP Server:
±
Select the check point of “Yes” or “No” to enable or disable a simple DHCP server for LAN.
±
Configure the IP address numbers for the DHCP server with
“lease pool start”
and
“lease pool end”
.
±
Configure the IP address lease time with “
lease time
” for DHCP server. Default
value is 604800 seconds.
Page 39 / 90
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
35
Fig. 15
2.
2.
2.
2. WAN
AN
AN
AN
You can configure the optional internal DHCP server for the WAN on this page. This can be required
by some ISP providers.
Select different WAN Connection Type will lead to different contents. Take the WAN connection
type-DHCP for example, you can release and renew the WAN lease by pressing the buttons.
You can enter a spoofed MAC address that causes your gateway networking stack to use that MAC
address when communicating instead of the usual WAN MAC address, e.g., if the MAC address is
00:11:e3:df:66:95
, this spoofed MAC address could be
00:11:e3:df:66:97
or any desired MAC
address.
Page 40 / 90
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
36
Fig. 16
3.
3.
3.
3. Computers
Computers
Computers
Computers
This page displays the status of the DHCP clients and current system time. You can cancel an IP
address lease by selecting it in the DHCP Client Lease Info list and then clicking the
Force Available
button. If you do so, you may have to perform a DHCP Renew on that PC, so that it can obtain a new
lease.
Fig. 17
19216811.live