Page 26 / 90
Scroll up to view Page 21 - 25
Chapter 1: Connections and Setup
Illustrations contained in this document are for representation only.
22
Fig. 5: Phone/Fax Connection
Turning on
Turning on
Turning on
Turning on the
the
the
the
Wireless Voice Gateway
Wireless Voice Gateway
Wireless Voice Gateway
Wireless Voice Gateway
If there is no lighted LEDs on the front panel, check the power on/off switch position on the back panel
of Wireless Gateway: it must be ”ON” = “1”.
After installing the
Wireless Voice Gateway and turn it on for the first time (and each time the modem is
reconnected to the power), it goes through several steps before it can be used. Each of these steps is
represented by a different pattern of flashing lights on the front of the modem.
Note: All indicators flash once before the initialization sequence.
Page 27 / 90
Chapter 1: Connections and Setup
Illustrations contained in this document are for representation only.
23
If both DS and US LEDs are flashing sequentially, it means the Wireless Voice Gateway is automatically
updating its system software. Please wait for the lights to stop flashing. You cannot use your modem
during this time. Do not remove the power supply, switch off (on/off switch) or reset the Wireless Voice
Gateway during this process.
Page 28 / 90
Illustrations contained in this document are for representation only.
24
Chapter
Chapter
Chapter
Chapter 2: WEB Configuration
WEB Configuration
WEB Configuration
WEB Configuration
To make sure that you can access the Internet successfully, please check the following first.
1.
Make sure the connection (through Ethernet or USB) between the Wireless Voice Gateway and
your computer is OK.
2.
Make sure the TCP/IP protocol is set properly.
3.
Subscribe to a Cable Company.
Accessing
ccessing
ccessing
ccessing the
the
the
the Web Configuration
Web Configuration
Web Configuration
Web Configuration
The
Wireless Voice Gateway
offers local management capability through a built in HTTP server and
a number of diagnostic and configuration web pages. You can configure the settings on the web page
and apply them to the device.
Once your host PC is properly configured; please proceed as follows:
1.
Start your web browser and type the private IP address of the Wireless Voice Gateway on the
URL field:
192.168.0.1.
2.
After connecting to the device, you will be prompted to enter username and password. By
default, the username is “ ” (empty) and the password is “
admin
”.
Fig. 6
If you login successfully, the main page will appear.
Page 29 / 90
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
25
Outline of Web Manager
Outline of Web Manager
Outline of Web Manager
Outline of Web Manager
The main screen will be shown as below.
Fig. 7
±
Main Menu
: the hyperlinks on the top of the page, including Gateway, VoIP and several
sub-menu items
±
Title
: the sidebar on the left side of the page indicates the title of this management interface, e.g.,
Software in this example
±
Main Window
: the current workspace of the web management, containing configuration or
status information
For easy navigation, the pages are organized in groups with group in names main menu. Individual
page names within each group are provided in the sidebar. So to navigate to a page, click the group
hyperlink at the top, then the page title on the sidebar.
Your cable company may not support the reporting of some items of information listed on your
gateway’s internal web pages. In such cases, the information field appears blank. This is normal.
Page 30 / 90
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
26
Warning message
Warning message
Warning message
Warning message to change the password
to change the password
to change the password
to change the password
At your first connection or while the password is the default one, a warning message is displayed on
the top banner of each Web configuration page. We want to encourage you to change the password in
order to enforce the security of your modem. Please refer to the chapter “
Password
” page 28 for more
information.
Gateway
Gateway
Gateway
Gateway – Status
Status
Status
Status Web Page Group
Web Page Group
Web Page Group
Web Page Group
1.
1.
1.
1. Software
Software
Software
Software
The information section shows the hardware and software information about your gateway.
The status section of this page shows how long your gateway has operated since last time being
powered up, and some key information the Cable Modem received during the initialization process
with your cable company. If Network Access shows “Allowed,” then your cable company has
configured your gateway to have Internet connectivity. If not, you may not have Internet access, and
should contact your cable company to resolve this.
19216811.live