Page 16 / 88
Scroll up to view Page 11 - 15
E-DOC-CTC-20080118-0051 v2.0
10
1
Installation
Page 17 / 88
E-DOC-CTC-20080118-0051 v2.0
11
2
Thomson Gateway Basics
2
Thomson Gateway Basics
In this chapter
Topic
Page
Thomson Gateway LED Behaviour
12
Thomson Gateway Web Interface
14
Backing Up/Restoring your Configuration
17
Page 18 / 88
E-DOC-CTC-20080118-0051 v2.0
12
2
Thomson Gateway Basics
2.1
Thomson Gateway LED Behaviour
Status LEDs
On the top panel of your Thomson Gateway, you can find a number of status LEDs, indicating the state of the
device during normal operation.
Power LED
Ethernet LED
Wireless/WLAN LED
Name
Colour
State
Green
Solid on
Power on, normal operation
Red
Solid on
Power on, self-test failed, indicating device malfunction
Orange
Solid on
Bootloader active (during upgrade)
Off
Power off
Name
Colour
State
Green
Blinking
Ethernet activity
Solid on
Ethernet connection, no activity
Off
No Ethernet connection
Name
Colour
State
Green
Blinking
Wireless activity, WPA(2) encryption
Solid on
No wireless activity, WPA(2) encryption
Amber
Blinking
Wireless activity, WEP encryption
Solid on
No wireless activity, WEP encryption
Red
Blinking
Wireless activity, no security
Solid on
No wireless activity, no security
Red/green
Toggling
Wireless client registration phase
Off
WLAN disabled
Page 19 / 88
E-DOC-CTC-20080118-0051 v2.0
13
2
Thomson Gateway Basics
Broadband/DSL LED
Internet LED
Phone/Voice LED
Ethernet LED (Ethernet port)
A LED may be provided per Ethernet port to indicate link integrity (or activity).
Name
Colour
State
Green
Blinking
Pending DSL line synchronisation
Solid on
DSL line synchronised
Off
No DSL line
Name
Colour
State
Green
Blinking
Internet activity
Solid on
Internet connectivity, no activity
Red
Solid on
Internet connection setup failed
Off
No Internet connection
Name
Colour
State
Green
Solid on
VoIP service up
Blinking
VoIP activity
Off
VoIP service down
LED Status
Description
Off
No connection on this port
Solid on
Ethernet link up
Blinking
Data is flowing from/to this port
Page 20 / 88
E-DOC-CTC-20080118-0051 v2.0
14
2
Thomson Gateway Basics
2.2
Thomson Gateway Web Interface
Introduction
The
Thomson Gateway Web Interface
allows you to configure your Thomson Gateway using your web
browser.
Requirements
Javascript must be enabled on your browser.
Accessing the Thomson Gateway Web Interface
Proceed as follows:
1
Open your web browser.
2
Browse to
http://dsldevice.lan
or to the IP address of your Thomson Gateway (by default:
192.168.1.254
).
3
If you have protected your Thomson Gateway with a user name and password, the Thomson Gateway
will prompt you to enter these. Enter your user name and password and click
OK
.
4
The
Thomson Gateway Web Interface
appears.
If your computer runs Windows Vista or Windows XP, you can also access the
Thomson Gateway Web
Interface
using the Internet Gateway Device icon. For more information, see
“4.3 Universal Plug and Play” on
page 46
.
19216811.live