Page 56 / 100
Scroll up to view Page 51 - 55
E-DOC-CTC-20090507-0002 v1.0
50
6
Thomson Gateway GUI
6.2
Broadband Connection
The Broadband Connection page
The
Broadband Connection
page gives you a short status overview of the broadband connections and the
Internet service(s) configured on your Thomson Gateway.
Click:
±
View more
to see more information on the corresponding broadband connection.
±
Connect
/
Disconnect
to establish/terminate a dial-up connection.
The Broadband Connection menu
In the
Broadband Connection
menu, you can find the following items:
Tasks
On the
Broadband Connection
page you can carry out following tasks:
±
Checking connectivity to the Internet
Click...
To...
Broadband Connection
View all information on the DSL connection configured on your Thomson
Gateway.
Internet Services
View basic information on the Internet service(s) configured on your
Thomson Gateway.
Page 57 / 100
E-DOC-CTC-20090507-0002 v1.0
51
6
Thomson Gateway GUI
6.2.1
Broadband Connection
Overview
The
DSL Connection
Overview
page displays basic DSL
Link Information
:
±
Uptime:
Time since the DSL link is up for this session.
±
DSL Type:
Type (modulation) of DSL line.
±
Bandwidth (Up/Down):
Available up- and downstream bandwidth in kilobits per second (kbps).
±
Data Transferred (Sent/Received):
Total amount of data sent and received during this session in kilobyte (kB).
Details
The
DSL Connection
Details
page displays all DSL
Link Information
:
Besides the same information as on the
Overview
page, the following information is also displayed:
±
Output Power (Up/Down)
in dBm
The Output Power in dBm (up and downstream direction).
±
Line Attenuation (Up/Down)
in dB
The Line Attenuation in dB (up and downstream direction).
±
SN Margin (Up/Down)
The Signal to Noise (SN) margin in dB (up and downstream direction).
Page 58 / 100
E-DOC-CTC-20090507-0002 v1.0
52
6
Thomson Gateway GUI
±
Vendor ID (Local/Remote)
The Vendor ID of the equipment at the local (i.e. the Thomson Gateway) and remote (Central Office) side.
±
Loss of Link (Local/Remote)
The number of times "Loss of link" is occurred. This is an indication of how many times the link to the CO
is lost on the physical layer. This is displayed for both the local and remote side.
±
Error Seconds (Local/Remote)
The time in seconds (accumulated) of error indications occured on the line. This is displayed for both the
local and remote side.
±
FEC Errors (Up/Down)
The amount of Forward Error Correction (FEC) errors (up and downstream direction).
±
CRC Errors (Up/Down)
The amount of Cyclic Redundancy Check (CRC) errors (up and downstream direction).
±
HEC Errors (Up/Down)
The amount of Header Error Correction (HEC) errors (up and downstream direction).
Page 59 / 100
E-DOC-CTC-20090507-0002 v1.0
53
6
Thomson Gateway GUI
6.2.2
Internet Services
Introduction
The
Internet Services
page displays the following basic information on the Internet service(s) configured on
your Thomson Gateway:
±
Uptime
±
Data Transferred
Click
View more
on the corresponding service to view the Internet service settings of this Internet service.
Overview
The
Internet Service Settings
Overview
page displays the following basic information:
±
Connection Information
:
²
Uptime:
Displays the time since the Internet service is up for this session.
²
Data Transferred:
Displays the total amount of data sent and received during this session in kilobyte (kB).
±
TCP/IP Settings:
²
IP Address
:
Displays the IP address of this Internet connection.
²
Default Gateway
:
Displays the IP address of the remote peer of this Internet connection.
²
Primary DNS
and
Secondary DNS
:
Displays the IP address of the primary and secondary DNS of this Internet connection.
Page 60 / 100
E-DOC-CTC-20090507-0002 v1.0
54
6
Thomson Gateway GUI
Details
The
Internet Service Settings Details
page displays all information of this Internet service:
In addition to the information shown on the
Overview
page, the following fields are added:
±
Connection Settings
:
²
PVC Info (VPI.VCI)
²
Type
, either be “
Bridge
”, “
PPPoE
”, “
PPPoA
” and etc.
±
PPP Settings (
only applicable for PPP connections):
²
Username
and
Password:
Displays the username and password of your Internet account.
²
Connection Mode:
Displays the PPP connection model, either be “
Always-On
”, “
On-Demand
” or “
Manual
”.
Connecting or disconnecting
If you configured a dial-up connection, you can establish/terminate the connection by clicking the
Connect
/
Disconnect
button.
19216811.live