Page 51 / 100
Scroll up to view Page 46 - 50
E-DOC-CTC-20090507-0002 v1.0
45
6
Thomson Gateway GUI
±
Summer Time:
Enable/disable time adjustment in regions where applicable
Click
Apply
to apply and save your settings.
Setting up your Thomson Gateway
The Easy Setup wizard helps you to configure your Thomson Gateway Internet connection.
Proceed as follows:
1
In the
Pick a task
list, click
Set up
. The embedded Easy Setup wizard appears:
2
Click
Next
.
3
The following window invites you to select the appropriate service for your Internet connection:
In the
Select a service
list, select the service specifiied by your Serivce Provider and click
Next
to
continue.
4
Subsequent screens will guide you through the configuration setup of your Thomson Gateway. Follow
the instructions and enter the required information whenever needed. The requested information will
depend on the selected Service profile and should be provided by your Service Provider.
Click
Next
whenever requested.
Page 52 / 100
E-DOC-CTC-20090507-0002 v1.0
46
6
Thomson Gateway GUI
5
Easy Setup will update the Thomson Gateway configuration according to the service profile.
6
As soon as the
Easy Setup
wizard completed the update of the Thomson Gateway configuration, the
following window appears:
Click
Finish
to close the
Easy Setup
wizard.
Page 53 / 100
E-DOC-CTC-20090507-0002 v1.0
47
6
Thomson Gateway GUI
Returning to Factory Default Settings
The
Reset to Factory Defaults
page allows you to return to the initial configuration of your Thomson
Gateway
.
Proceed as follows:
1
In the
Pick a task
list, click
Return to Factory Default Settings.
2
The following page appears:
3
Click
Yes, reset my Thomson Gateway
.
Saving or Restoring Configuration
The
Backup & Restore
page allows you to:
±
Save your current configuration.
±
Restore a previously saved configuration.
For more information, see
”2.3 Backing Up/Restoring your Configuration” on page 16
.
All changes you have made to the configuration will be deleted. If you want to save your current
configuration, see
”2.3 Backing Up/Restoring your Configuration” on page 16
.
If you reset your Thomson Gateway to factory default settings, all wireless and broadband
connections may be disconnected permanently after reboot (other settings) or briefly interrupted
during the reboot.
Page 54 / 100
E-DOC-CTC-20090507-0002 v1.0
48
6
Thomson Gateway GUI
Firmware upgarde
This
Firmware Upgrade
page allows you to upgrade the Thomson Gateway with a firmware which is located
on your computer.
Proceed as follows:
1
In the
Pick a task
list, click
Firmware Upgrade
.
2
Click
Browse
. Browse to the firmware on your local computer and open it.
3
Click
Apply
. The Thomson Gateway upgrades your firmware.
Page 55 / 100
E-DOC-CTC-20090507-0002 v1.0
49
6
Thomson Gateway GUI
6.1.3
Event Logs
Introduction
The
Event Logging
page summarises the last events recorded on your Thomson Gateway.
The first entry is the most recent recorded event.
Recorded Events
The
Recorded Events
table gives you an overview of the last event logs that have been recorded since the
Thomson Gateway was turned on. You can perform the following actions:
±
Click
Download
to save the event logs to a location of your choice.
±
Click
Clear
to clear the event logs.
±
Click
Refresh
to refresh the
Event Logging
page.
19216811.live