Thomson ST5x6v6 Router Manual PDF (Setup & Configuration Guide)

Page 16 / 44 Scroll up to view Page 11 - 15

E-DOC-CTC-20060911-0017 v2.0

Chapter 2

Basic Installation

10

Home Install Wizard

The Home Install Wizard guides you through your local network connections and prepares the Thomson

Gateway to connect to the Internet. Proceed as follows:

1

On the

Welcome

page, click

The

Software License Agreement

window appears.

2

You must accept before continuing. Click

Yes

to accept.

The Home Install Wizard checks your system and invites you to connect the Thomson Gateway to your

computer.

!

If you accepted the Software License Agreement in a previous configuration setup, this window

will not be shown.

Page 17 / 44

E-DOC-CTC-20060911-0017 v2.0

Chapter 2

Basic Installation

11

3

Make the following connection:

±

Connect the yellow RJ-45 Ethernet cable to the yellow Ethernet port on your Thomson Gateway and

the other end to the computer’s Ethernet port.

4

Once the hardware is installed and connected to the Thomson Gateway, the procedure continues with

configuring your Internet connection.

Proceed with

“ Configuring the Internet connection” on page 12

.

i

If the wizard does not detect a connection, an error message will be displayed. Refer to

“ The

wizard does not detect a connection” on page 31

.

Page 18 / 44

E-DOC-CTC-20060911-0017 v2.0

Chapter 2

Basic Installation

12

Configuring the Internet connection

Proceed as follows:

1

If prompted, enter the

User name

and

Password

for your Thomson Gateway security settings and click

OK

.

2

Select the appropriate

Region

,

Provider

and

Service

for your Internet connection as specified by your

Internet Service Provider and click

Next.

3

Your connection to the Internet connectivity is set up:

±

Select the

VPI/VCI

- and, if required, the

Connection Type

- as specified by your Internet Service

Provider and click

±

Enter the

User Name

and

Password

for your Internet account settings as specified by your Internet

Service Provider and click

4

The procedure continues with some additional configurations.

Proceed with

“ Configuring the Thomson Gateway (and your computer)” on page 13

.

i

The factory default user is ‘Administrator’ and its password is blank. It is advisable to specify

another user name and password during the configuration procedure to protect your Thomson

Gateway from security violation. See

“2.6 Basic Security” on page 21

for more information.

Page 19 / 44

E-DOC-CTC-20060911-0017 v2.0

Chapter 2

Basic Installation

13

Configuring the Thomson Gateway (and your computer)

Proceed as follows:

1

Depending on the selected service profile and your ISP’s requirements, you may have to fill in some

additional settings during the Home Install Wizard, like Dynamic DNS Service, Time Configuration or

other.

Enter the information provided by your ISP and click

2

Provide a user name and password to protect your Thomson Gateway from unauthorised access. Each

time a user wants to access a Thomson Gateway management interface, the user will be prompted to

provide this user name and password before access is granted.

Click

3

The procedure continues with the final steps of configuring your Thomson Gateway and your computer.

Proceed with

“ Finishing the Home Install Wizard” on page 14

.

Page 20 / 44

E-DOC-CTC-20060911-0017 v2.0

Chapter 2

Basic Installation

14

Finishing the Home Install Wizard

The Home Install Wizard will configure the Thomson Gateway and your computer according to the service

profile. Proceed as follows:

1

You can follow the configuration progress in following window:

2

Click

Finish

to close the wizard.

The following steps will happen automatically:

±

After some seconds, the Internet

LED on your Thomson Gateway will be lit green to indicate Internet

connectivity. If not, refer to

“4.2 LED Diagnostics” on page 27

. If needed, you can test your Internet

connection as described in

“ Testing your Internet Connection” on page 29

.

±

The CD Menu is displayed. See

“2.3 The Setup CD” on page 17

for more information.

±

You are redirected to the embedded Thomson Gateway pages automatically (unless you cleared the

http://dsldevice.lan

check box in the last window of the Home Install Wizard). These pages allow you

to configure the Thomson Gateway firewall, Thomson Gateway settings, and so on. See the User’s

Guide for more information.

Rate

Popular Thomson Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share