1. Home
    2. /
  2. Manuals
    3. /
  3. Thomson
    4. /
  4. ST5x6v6
    5. /
  5. 3
Page 11 / 44 Scroll up to view Page 6 - 10
E-DOC-CTC-20060911-0017 v2.0
Chapter 2
Basic Installation
5
2
Basic Installation
Before you begin
Make sure you read the safety instructions and regulatory notices first. You can find the safety instructions on
the Setup CD (see
“2.2 Installing your Thomson Gateway” on page 7
). They may also be provided as a
printed booklet.
ADSL service
The ADSL service must be up and running on your telephone line.
If both conventional telephone and ADSL service are simultaneously available from the same copper pair,
you will need a central splitter or distributed filters for decoupling ADSL and telephone signals.
Computer requirements
>
To connect your computer via Ethernet, make sure the computer is equipped with an Ethernet network
interface card (NIC).
>
122g USB adapter
Internet connection details
You need the following connection details from your Internet Service Provider (ISP):
>
Your ISP’s method for connecting to the Internet (for example PPPoE)
>
The VPI/VCI (for example 8/35)
>
Your user name and password to connect to the Internet
You must have received this information when you subscribed to DSL at your Internet Service Provider (ISP).
You will be prompted for this information at a given step in the installation procedure.
!
Public telephone lines carry voltages that can cause electric shock. Only try to set up splitter/filters
that have been designed to be installed by unqualified personnel. For further assistance, contact
your Internet Service Provider.
Page 12 / 44
E-DOC-CTC-20060911-0017 v2.0
Chapter 2
Basic Installation
6
2.1
Mounting your Thomson Gateway
Setup possibilities
You can mount the Thomson Gateway on a wall or simply place it on a desk.
Wall mount
Proceed as follows to mount the Thomson Gateway on a wall or other vertical surface:
1
Drill two holes in the wall or other vertical surface where you want to place the Thomson Gateway.
2
Fasten two screws in the wall holes. The screws should protrude five millimetres from the surface of the
wall.
3
Attach your Thomson Gateway on the wall using the two mounting slots on the bottom.
i
If you install the Thomson Gateway onto plasterboard, use dowels to secure the screws.
Otherwise the strain of the cables connected to the Thomson Gateway rear panel connectors
could pull the Thomson Gateway from the wall.
MODEM ACCESS CODE: 0123456789
MAC: AAABCCCDDEEE
THOMSON TELECOM
*ACCESS°CODE°0123456789*
*MACADDRESS°AAABCCCDDEEE*
SSID:SoeedTouchVVVVVV
WEP (hex):1234ABCDEF
WPA PSK: 1234ABCDEF
TCM: 12345670
SpeedTouch ZZZ
DSLBSFFFFF RQQI
S/N:CPYYWWPPXXX (CC)
*DSLBSFFFFF°RQQI*DSLBSFFFFF°RQQI
*MACADDRESS°AABCCCDDEEE*
RATED INPUT: 18V
~
1
0mA
!
Page 13 / 44
E-DOC-CTC-20060911-0017 v2.0
Chapter 2
Basic Installation
7
2.2
Installing your Thomson Gateway
Internet connectivity setup
There are different ways to set up your Thomson Gateway. The best way depends on your operating system.
If you use the following operating
system
the recommended way to set up your Thomson
Gateway is
Microsoft Windows (98 SE, Millennium,
2000 or XP)
the Home Install Wizard, as described in
“2.2.1 Guided
Installation” on page 8
.
Mac OS X
Any operating system (provided you
have IP connectivity)
the Easy Setup, as described in
“2.2.2 Manual Installation” on
page 15
.
Page 14 / 44
E-DOC-CTC-20060911-0017 v2.0
Chapter 2
Basic Installation
8
2.2.1
Guided Installation
Introduction
On the CD, a Quick-Install Wizard is provided that will guide you through the first installation and setup of
your Thomson Gateway.
The Quick-Install Wizard will:
>
Provide important safety and regulatory information.
>
Show you how to make the necessary connections to your Thomson Gateway.
>
Show you how to turn on your device.
>
Prepare you to smoothly run the Thomson Gateway Home Install Wizard.
The subsequent Home Install Wizard will then prepare your Thomson Gateway and your local computer(s) to
connect to the Internet.
The Home Install Wizard will:
>
Guide you through connecting your computer(s) to your Thomson Gateway.
>
Prepare the Thomson Gateway to connect to the Internet.
Connecting the cables: wait!
Do not plug in any cables until you are prompted to do so by the Quick-Install Wizard and/or the Home Install
Wizard.
Starting the CD for the first time
To start the Thomson Gateway Setup:
1
Insert the Setup CD into your computer's CD-ROM or DVD-ROM drive.
±
Microsoft Windows: The CD should autostart.
±
Mac OS X: Double-click
Menu
in the window with the content of the CD.
2
Select the language of your choice and click
OK
.
3
The procedure continues with the Quick-Install Wizard.
Proceed with
“ Quick-Install Wizard” on page 8
.
Quick-Install Wizard
The Quick-Install Wizard guides you through the first setup of your Thomson Gateway.
1
On the
Welcome
page, click
Next
to continue.
!
You need administrative rights to run the applications on the Setup CD on a Microsoft Windows
2000 or XP operating system, or Mac OS X computer.
!
If not, see
”The Thomson Gateway CD does not start automatically” on page 31
.
!
If you ran the CD on this computer before, the Quick-Install Wizard is not shown; the CD menu
appears instead (see
“2.3 The Setup CD” on page 17
for more information).
Page 15 / 44
E-DOC-CTC-20060911-0017 v2.0
Chapter 2
Basic Installation
9
2
Select your Thomson Gateway from the list of supported devices and click
Next
.
The Thomson Gateway Safety Instructions and Regulatory Notices are displayed.
3
Scroll down and read all the instructions carefully, select
I have read and I fully understand the Safety
Instructions and Regulatory Information
to confirm your reading, and then click
Next
.
4
Subsequent screens guide you through the preliminary hardware setup of your Thomson Gateway.
Follow all the instructions carefully and click
Next
each time your are ready to proceed.
5
Click
Set up my THOMSON ST
to continue.
6
The procedure continues with the Home Install Wizard.
Proceed with
“ Home Install Wizard” on page 10
.
i
A product picture helps you to easily identify your Thomson Gateway. If you are not sure
what device you have, check the label on the bottom of your Thomson Gateway.
!
Your Thomson Gateway is designed and tested to meet the latest safety standards. However, to
ensure safe use of this product, it is important that you carefully read and comply with the
Safety Instructions and Regulatory Notices shown and/or available in the Safety and
Regulatory booklet before you install the Thomson Gateway.

Rate

124.8 / 5 based on 304 votes.

Popular Thomson Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top