Page 36 / 102
Scroll up to view Page 31 - 35
Chapter 3
Internet Connectivity Dial-In Clients
E-DOC-CTC-20050429-0100 v1.0
28
Terminating a
broadband Internet
session
Proceed as follows:
1
On the
Start
menu, point
Connect To
and click the name of the connection
you’ve created, for example YourISP.
2
The
YourISP Status
window appears:
3
Click
Disconnect
.
4
The connection is released. As a result no Internet connectivity exists any
more.
If you are using the
Classic Start
menu go to
Start > Settings >
Network (and Dial-up) connections > YourISP
.
Page 37 / 102
Chapter 3
Internet Connectivity Dial-In Clients
E-DOC-CTC-20050429-0100 v1.0
29
3.4
Mac OS X PPPoE Dial-in Client
Prerequisites
To be able to use the MS Windows XP BroadBand Connection, your SpeedTouch™
must be configured for either:
±
Bridging, or
±
PPPoE Relay
Configuring a
broadband connection
Proceed as follows:
1
On the
Apple
menu, click
System Preferences
.
2
In the
System Preferences
window, click the
Network
icon.
3
The
Network
window appears. Make sure
Built-in Ethernet
is selected in the
Show
list and click the
PPPoE
tab:
4
Enter the
Account Name
and
Password
provided by your
Service Provider
.
5
Click
Apply Now
.
Select
Save password
in case you want the computer to remember
the password for this account name.
Optionally you can enter a name for this connection in the
Service
Provider
field. All other fields may stay empty.
Page 38 / 102
Chapter 3
Internet Connectivity Dial-In Clients
E-DOC-CTC-20050429-0100 v1.0
30
Starting a broadband
Internet session
Proceed as follows:
1
Click the
Internet Connect
dockling.
2
The following window appears:
Make sure
Built-in Ethernet
is selected in the
Configuration
list.
3
If needed, enter user name and password for your user account at the Service
Provider.
4
Click
Connect
.
5
As soon as the connection is established you can open your web browser and
surf the Internet.
Terminating a
broadband Internet
session
Proceed as follows:
1
Click the
Internet Connect
dockling.
2
The following window appears:
Make sure
Built-in Ethernet
is selected in the
Configuration
list
3
Click
Disconnect
.
4
The connection is released. As a result no Internet connectivity exists any
more.
If the
Internet Connect
dockling is not available, go to the
Applications
folder on the system startup disk and double-click
Internet Connect
.
If the
Internet Connect
dockling is not available, go to the
Applications
folder on the system startup disk and double-click
Internet
Connect
.
Page 39 / 102
Chapter 4
SpeedTouch™ Web Interface
E-DOC-CTC-20050429-0100 v1.0
31
4
SpeedTouch™ Web Interface
Introduction
The SpeedTouch™ comes with embedded HTML pages, providing an interface to the
software installed on the device. It allows easy setup and management of the
SpeedTouch™ via your web browser form any PC connected to the SpeedTouch™.
See
“1.3.1 Access via the Web Interface” on page 10
to access the pages.
SpeedTouch™
documentation
Consult:
±
The SpeedTouch™ Installation and Setup Guide
for more information on setup and installation procedures.
Page 40 / 102
Chapter 4
SpeedTouch™ Web Interface
E-DOC-CTC-20050429-0100 v1.0
32
4.1 Navigation
Navigation components
The SpeedTouch™ web interface consists of following components:
±
Menu
±
Language Bar
±
Navigation Bar
±
Notification Area
±
Tasks
Menu
Tasks
Navigation bar
Notification area
Language bar
19216811.live