Page 16 / 131
Scroll up to view Page 11 - 15
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
13
An ISO Certificed Company
Field
Description
DSL Status
The status of the ADSL port.
Downstream Data Rate
Down line rate.
Upstream Data Rate
Up line rate.
Wireless Settings
Status
The status of the wireless network.
SSID
Service set identification (SSID) is a unique
name to identify the modem in the wireless
LAN.
LAN Port
Mac Address
The MAC address of the modem.
IP Address
The IP address of the modem.
DHCP server
The current status of the DHCP server.
Voice
Status
The VoIP status.
Registration Status
It displays the registration status of VoIP
application.
Note:
The firmware version displayed in this page may be inconsistent with the actual
software version, and is for reference only.
3.3.1.2
Advanced
Click
Advanced
in the
Overview
page and the following page appears.
Page 17 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
14
An ISO Certificed Company
Page 18 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
15
An ISO Certificed Company
The following table describes the parameters of this page.
Field
Description
System Information
DSL Firmware Version
The hardware version of the modem.
Wireless version
The wireless version of the modem.
Internet Connection
Connected Standard
The status of the line mode.
Status
It contains the configuration information about
ARP
,
DHCP Traffic Stats
, and
Wireless
Connection
.
Note:
The rate is measured under a zero-kilometer link. In the circumstances, the
gateway is automatically set, and the DNS addresses are obtained from the
BRAS.
3.3.2
System Log
Choose
Home
>
System Log
and the following page appears. In this page, you
can consult the logs after relevant settings. You can also save the current settings
to your PC.
Page 19 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
16
An ISO Certificed Company
Note:
Set the query time consistent with the SNTP if you want to obtain the real-time
of the system logs.
3.3.3
Troubleshooting
Choose
Home
>
Troubleshooting
to enter the troubleshooting page. This page is
used to carry out diagnostic test. Troubleshooting allows you to carry out diagnostic
tests on your local Ethernet and WAN connection by ping the web site or running
the diagnostic tests. The tests results can be used to identify all the problems that
are related to your DSL connection or the configuration of the modem.
Enter a well-known site ( for example, IP 10.18.102.55) that you want to test. Click
Ping
and the following page appears.
If the network connects well and the IP address or the site is effective, the ping of
the well-known site passes. Otherwise, it is failed to ping the well-known site.
Select the Internet connection that you want to test from the drop-down list (take
bridge_8_81 for example). Click
Run Diagnostic Tests
and the following page
appears. In this page, you can view the test result.
Page 20 / 131
User Manual for T2-B-Gawv1.4U10Y.BI
Teracom Limited
17
An ISO Certificed Company
The information that is displayed helps you to locate the problems.
3.4
Configuration
Click
Configuration
to enter system configuration page. On the left page, there are
seven options:
Wireless Network
,
Internet Connection
,
Local Network (LAN)
,
Voice Configuration
,
DHCP Server
,
DHCP Relay
,
and
IPv6 Prefix
. You can
modify LAN and WAN settings, such as PVC, LAN port, and DHCP.
3.4.1
Wireless Network
A wireless local area network (WLAN) provides a flexible data communications
system that you can use to access various services, such as, surfing on the
Internet, E-mail, and printing services, without the cable connection. You can
connect to the Internet while roaming around in the converage area.
Choose
Configuration
>
Wireless Network
and the following page appears. In
this page, you can configure the parameters for wireless LAN clients that may
connect to the modem.
19216811.live