Page 26 / 76
Scroll up to view Page 21 - 25
11N Wireless Broadband Router
21
The default value is 1492. Do NOT modify it unless
necessary. But if when some specific website or
web application software can not be open or
enabled, have a try to change the MTU value as
1450, 1400, etc.
¾
Service Name:
It is defined as a set of
characteristics that are applied to a PPPoE
connection. Enter it if provided. Do NOT modify it
unless necessary.
¾
AC Name:
Enter it if provided. Do NOT modify it
unless necessary.
¾
Connect Automatically:
Connect automatically
to the Internet after rebooting the system or
connection failure.
¾
Connect Manually:
Connect to the Internet by
users manually.
¾
Connect
on
Demand:
Re-establish
your
connection to the Internet after the specific time
(Max Idle Time). Zero means your Internet
connection at all time. Otherwise, enter the
minutes to be elapsed before you want to
disconnect the Internet access.
¾
Connect on Fixed Time:
Connect to the Internet
during the time you fix.
Notice:
The “Connect on Fixed Time” can be deployed only
when you have set the current time in “Time
Settings” from “System Tools”.
Page 27 / 76
11N Wireless Broadband Router
22
Static IP
If your connection mode, static IP is chosen, you can
modify the following addressing information.
¾
IP Address:
Here enter the WAN IP address
provided by your ISP.
¾
Subnet Mask:
Enter the WAN Subnet Mask
here.
¾
Gateway:
Enter the WAN Gateway here.
¾
Primary DNS Server:
Enter the Primary DNS
server provided by your ISP.
¾
Secondary DNS Server:
Enter the secondary
DNS.
Page 28 / 76
11N Wireless Broadband Router
23
5.3 MAC Address Clone
This page is for the Router’s MAC address to WAN.
Some ISPs require end-user's MAC address to access
their network. This feature copies the MAC address of
your network device to the Router.
¾
MAC Address:
The MAC address to be registered
with your Internet service provider.
¾
Clone MAC Address:
Register your PC's MAC
address.
¾
Restore Default MAC Address:
Restore to the
default hardware MAC address.
Page 29 / 76
11N Wireless Broadband Router
24
5.4 DNS Settings
DNS is short for Domain Name System (or Service), an
Internet service that translate domain names into IP
addresses which are provided by your Internet Service
Provider. Please consult your Internet Service Provider
for details if you do not have them.
¾
DNS:
Click the checkbox to enable the DNS server.
The Router’s DHCP sever will answer the client’s
requests and distribute DNS address.
¾
Primary DNS Address:
Enter the necessary
address provided by your ISP.
¾
Secondary DNS Address:
Enter the second
address if your ISP provides, which is optional.
Notice:
After the settings are completed, reboot the device
to activate the modified settings.
Page 30 / 76
11N Wireless Broadband Router
25
Chapter 6 Wireless Settings
6.1 Basic Settings
¾
Enable Wireless:
Check to enable the Router’s
wireless features; uncheck to disable it. You can
also press the WLAN/WPS button to turn on/off the
wireless function.
¾
Network Mode
: Select one mode from the
following. The default is 11b/g/n mode.
11b mode:
Allow the wireless client to connect
19216811.live