Page 21 / 76
Scroll up to view Page 16 - 20
11N Wireless Broadband Router
16
ADSL Virtual Dial-up (Via PPPoE)
Enter the Account and Password provided by your ISP,
and click “Next”.
For example:
Dynamic IP (Via DHCP)
If your connection mode is Dynamic IP, it means your IP
address keeps changing every time you connect. You do
not need to enter the information like other modes.
Click “Next” and “Save” to finish the settings.
Page 22 / 76
11N Wireless Broadband Router
17
Static IP
In this screen, fill the network address information from
your ISP in the IP Address, Subnet Mask, Gateway and
Primary DNS server fields and click “Next”.
For example:
ISP provides the following TCP/IP parameters as
follows:
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Primary DNS Server: 192.168.1.2
Alternate DNS Server: 202.96.134.133
Page 23 / 76
11N Wireless Broadband Router
18
Click “Save” to complete the setup wizard. The Router
will record the settings you made. To activate the
settings, it is recommended to select “Reboot the
Router” from “System Tool” of the left menu. It is
rebooting now, please wait for a few minutes and DO
NOT power off it.
Click the “System Status” in the left menu of the
Web-based Utility to find out the current network and
system information. If the “Connection Status” is
“Connected”, Congratulations you on completing the
Router’s basic settings. You are on the Internet now. If
you want to configure more, please proceed to the
following explanations for Advanced Settings.
Page 24 / 76
11N Wireless Broadband Router
19
Chapter 5 Advanced Settings
5.1 LAN Settings
LAN Settings are for the basic TCP/IP parameters of LAN
ports.
¾
MAC Address:
The Router’s physical MAC address
as seen on your local network, which is
unchangeable.
¾
IP Address:
The Router’s LAN IP addresses (not
value.
¾
Subnet Mask:
It’s shown the Router’s subnet
mask for measurement of the network size.
255.255.255.0 is the default value.
IMPORTANT:
Once you modify the IP address, you need to remember
it for the Web-based Utility login next time.
Page 25 / 76
11N Wireless Broadband Router
20
5.2 WAN Settings
After you have selected the ISP connection type in
“Setup Wizard” and you want to modify the related
settings, here you can modify and configure the settings
in details.
Virtual Dial-up (PPPoE)
¾
Connection Mode:
Show your current connection
mode.
¾
Account:
Enter them provided by your ISP.
¾
Password:
Enter them provided by your ISP.
¾
MTU:
Maximum Transmission Unit. It is the size of
largest datagram that can be sent over a network.
19216811.live