Tenda W306R Router Manual PDF (Setup & Configuration Guide)

Page 91 / 93 Scroll up to view Page 86 - 90

11N Wireless Broadband Router

86

button for 7 seconds to restore to default settings. And

then repeat the ping operation. If it still does not work,

please contact us.

2

、

Forget the login password and can not enter the

setting page. What can I do?

Press the “RESET” button for 7 seconds to restore the

Router to default settings.

3

、

The computer connected with the Router shows IP

address conflict. What can I do?

Check if there are other DHCP servers in the LAN. If

there have, disable them. The default IP address of the

Router is 192.168.0.1 and please maker sure the

address is not occupied by other devices. If there are

two computers with the same IP addresses, please

modify one.

4

、

I can not use E-mail and access the Internet. What

can I do?

It happens in ADSL connection and Dynamic IP users.

And you need modify the default MTU value (1492).

Please in the “WAN Setting” modify the MTU value with

Page 92 / 93

11N Wireless Broadband Router

87

the recommended value as 1450 or 1400.

5

、

How to configure and access the Internet via

Dynamic IP?

In Setup Wizard of the Web utility interface, select

“Dynamic IP” connection type and click “Save” to

activate it. As some ISPs bind the user computer’s MAC

address, you need to clone the Router’s WAN MAC

address to the bind21ing PC’s MAC address. Select

“MAC Address Clone” in “Advanced Setting” to input

your computer’s MAC address and click “Apply” to

activate it.

6

、

How to share my computer’s source with other users

in Internet

？

If you want Internet users to access the internal server

via the Router such as e-mail server, Web, FTP, you can

configure the “Virtual Server” to come true.

Step 1: create your internal server, make sure the LAN

users can access these servers and know related service

port. For example, Web server’s port is 80; FTP is 21;

SMTP is 25 and POP3 is 110.

Step 2: in the Router’s web click “Virtual Server” and

select “Single Port Forwarding”.

Step 3: input the external service port given by the

Router, for example, 80.

Page 93 / 93

11N Wireless Broadband Router

88

Step 4: input the internal Web service port, for example,

80.

Step 5: Input the internal server’s IP address. If your

Web server’s IP address is 192.168.0.10, please input

it.

Step 6: select the communication protocol used by your

internal host: TCP, UDP, ICMP.

Step 7: click “Apply” to activate the settings.

The following table has listed the well-known

application and service port:

Server

Protocol

Service Port

WEB Server

TCP

80

FTP Server

TCP

21

Telnet

TCP

23

NetMeeting

TCP

1503

、

1720

MSN

Messenger

TCP/UDP

File

Send:6891-6900(TCP)

Voice:1863

、

6901(TCP)

Voice:1863

、

5190(UDP)

PPTP VPN

TCP

1723

Iphone5.0

TCP

22555

SMTP

TCP

25

POP3

TCP

110

Rate

Popular Tenda Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share