Page 76 / 93
Scroll up to view Page 71 - 75
11N Wireless Broadband Router
71
Chapter 12 Routing Setting
12.1 Routing Table
The main duty for a router is to look for a best path for
every data frame, and transfer this data frame to a
destination. So, it’s essential for the router to choose
the best path, i.e. routing arithmetic. In order to finish
this function, many transferring paths, i.e. routing table,
are saved in the router, for choosing when needed.
12.2 Static Routing
This page is used to configure the Router’s static
routing.
Page 77 / 93
11N Wireless Broadband Router
72
¾
Destination LAN IP:
The address of the remote
host with which you want to construct a static
route.
¾
Subnet Mask:
The network portion of the
Destination LAN IP.
¾
Gateway:
The gateway of the next hop, usually
the Router or host’s IP address.
Note
：
1. The gateway must keep the same segment with
the Router’s LAN IP address.
2. If the destination IP address is one host’s IP
address,
the
Subnet
mask
should
be
255.255.255.255.
3. If the destination IP address is an IP address
range, the subnet mask should match the IP
address. For example, if the IP is 10.0.0.0, subnet
mask should be 255.0.0.0; if the IP is 10.1.2.0,
subnet mask should be 255.255.255.0.
Page 78 / 93
11N Wireless Broadband Router
73
Chapter 13 System Tools
13.1 Time Settings
This section is to select the time zone for your location.
If you turn off the Router, the settings for time disappear.
However, the Router will automatically obtain the GMT
time again once it has access to the Internet.
¾
Time Zone:
Select your time zone from the
drop-down menu.
¾
Customized time:
Enter the time you customize.
Note
：
When the Router is powered off, the time setting
will be lost. Before the Router will obtain GMT time
automatically, you need connect with the Internet
and obtain the GMT time, or set the time on this
page first. Then the time in other features (e.g.
firewall) can be activated.
Page 79 / 93
11N Wireless Broadband Router
74
13.2 DDNS
The DDNS (Dynamic Domain Name System) is
supported in this Router. It is to assign a fixed host and
domain name to a dynamic Internet IP address, which is
used to monitor hosting website, FTP server and so on
behind the Router. If you want to activate this function,
please select “Enable” and a DDNS service provider to
sign up.
¾
Main Features:
Owing to ISP most times provides dynamic IP
address, DDNS is used to capture the changeable
IP address and match the fixed domain. Then users
can have access to the Internet to communicate
with others.
DDNS can help you establish virtual host in your
home and company.
¾
DDNS:
Click the radio button to enable or disable
the DDNS service.
¾
Service Provider:
Select one from the drop-down
Page 80 / 93
11N Wireless Broadband Router
75
menu and press “Sign up” for registration.
¾
User Name:
Enter the user name the same as the
registration name.
¾
Password:
Enter the password you set.
¾
Domain Name:
Enter the domain name which is
optional.
For example
：
and register in 3322.org as follows:
User name
tenda
Password
123456
Domain Name
tenda.vicp.net
After mapping the port in the virtual server, setting
account information in DDNS server and in the address
field entering
, you can access
the Web page.
19216811.live