Page 61 / 67
Scroll up to view Page 56 - 60
Wireless-N Broadband Router
Chapter 12: System Tools
Time
This section is to select the time zone for your
location. If you turn off the Router, the settings for
time disappear. However, the Router will
automatically obtain the GMT time again once it
has access to the Internet.
Time Zone:
Select your time zone from the
drop-down menu.
Customized time:
Enter the time you customize.
DDNS
The
DDNS (Dynamic Domain Name System)
is
supported in this router. It is to assign a fixed host
and domain name to a dynamic Internet IP
address, which is used to monitor hosting
website, FTP server and so on behind the Router.
If you want to activate this function, please select
“Enable” and a DDNS service provider to sign up.
DDNS:
Click the radio button to enable or disable
the DDNS service.
Service Provider:
Select one from the
56
Page 62 / 67
Wireless-N Broadband Router
drop-down menu and press “Sign up” for
registration.
User Name:
Enter the user name the same as
the registration name.
Password:
Enter the password you set.
Domain Name:
Enter the domain name which is
optional.
Backup/Restore
The device provides backup/restore settings, so
you need set a directory to keep these
parameters.
Backup:
Click this button to back up the Router’s
configurations.
Browse:
Click this button to browse the directory
where you Back up or save files.
Restore:
Click this button to restore the Router’s
configurations.
57
Page 63 / 67
Wireless-N Broadband Router
Firmware Upgrade
The Router provides the firmware upgrade by
clicking the “Upgrade” after browsing for the
firmware upgrade packet which you can
download from www.tenda.cn
. After the upgrade
is completed, the Router will reboot automatically.
Browse:
Click this button to browse the directory
where you download the firmware upgrade files.
Upgrade:
Click this button to start upgrade.
IMPORTANT:
Do not power off the system
during the firmware upgrade to
avoid damaging the device. The
Router will reboot after the
upgrade.
58
Page 64 / 67
Wireless-N Broadband Router
Restore to Factory Default Settings
This button is to reset all configurations to the
default values. It means the Router will lose all
the settings you have set. So please Note down
the related settings if necessary.
Restore to Factory Default Settings:
Click this
button to restore to default settings.
Factory Default Settings:
User Name:
admin
Password:
admin
IP Address:
192.168.0.1
Subnet Mask:
255.255.255.0
NOTE: After restoring to default settings,
please restart the device, then the
default settings can go into effect.
59
Page 65 / 67
Wireless-N Broadband Router
Reboot
Rebooting the Router makes the settings
configured go into effect or to set the Router again
if setting failure happens.
Reboot the router:
Click this button to reboot the
device.
Change Password
This section is to set a new user name and
password to better secure your router and
network. Please Note that the new password
should be less than 14 characters.
User Name:
Enter a new user name for the
device.
Old Password:
Enter the old password.
New Password:
Enter a new password.
Re-enter to Confirm:
Re-enter to confirm the
new password.
NOTE: It is highly recommended to change
the password to secure your
network and the Router.
60
19216811.live