Page 121 / 139
Scroll up to view Page 116 - 120
ADSL2/2+ Router
Appendix 1
1. Setting the IP of your PC manually
Choose “Use the following IP address”, and enter the IP address:
192.168.1.xxx. (xxx ranges 2~254), Subnet mask : 255.255.255.0,
You
can enter your local DNS
server address (consult your local ISP) or set the Router as DNS proxy
server.
Click “OK” to finish settings. Then click “OK” on “Properties” of
“local area connection” to save settings.
- 121 -
Page 122 / 139
ADSL2/2+ Router
2. PC dial-up
When working in bridging mode, W300D connects with internet via
dial-up software (the third party software). With multiple built-in VPI/VCI,
there is no need for any configuration and only an installed dial-up
program will enable access to internet. Different ISP may use different
dial-up software.
Use the included dial-up software of Windows to access internet if you
are a PPPoE dial-up user. ISP may provide special dial-up software.
Please refer to the matched “help” files of the third party software during
installation.
The installation method of Windows dial-up software is illustrated below
(Windows 7 is used as an example).
a)
Click
icon on the left bottom of the PC’s desktop, and then
click “Control Panel”:
b)
Enter Control Panel page and click “Network and Sharing Center”
as below:
- 122 -
Page 123 / 139
ADSL2/2+ Router
c)
Enter “Network and Sharing Center” and select “Set up a new
connection or network” as below:
d)
Choose “Connect to the Internet” and click “Next” on the page
below:
- 123 -
Page 124 / 139
ADSL2/2+ Router
e)
Select “Dialup” on the appearing page below:
f)
Enter User name and password provided by your ISP on the page
below:
- 124 -
Page 125 / 139
ADSL2/2+ Router
g)
And then click “Connect”.
h)
If you get the screen below in a while, then you can access
Internet.
- 125 -
19216811.live