Page 106 / 139
Scroll up to view Page 101 - 105
ADSL2/2+ Router
You only need to check the wireless network that you want to bridge
with and click the “Apply/Save” button. And system will automatically
establish wireless bridge with the remote device for you.
Disabled:
To disable wireless bridge function, select this option.
Note:
To use the wireless bridge function, both devices must
support the function. Besides, SSID, channel, encryption
method and key of one device must be set to the same value
of its link partner’s.
4.3.5 Station Info
This page shows authenticated wireless stations and their status.
4.4 Diagnostics
Through the Diagnostics function, you can check connection status of
- 106 -
Page 107 / 139
ADSL2/2+ Router
the router’s interfaces.
When a connection is successfully established,
its status displays a “PASS”, otherwise it displays a “FAIL” click ". To
enter the page below, click the “Diagnostics” tab on the left navigation
menu column:
If you are not clear about the test result, please click “Help” for more
details.
- 107 -
Page 108 / 139
ADSL2/2+ Router
4.5 Management
Management settings include: system log, TR-069 client, Internet time,
access control, backup, update, restore default
，
update software and
reboot, as shown in the picture below.
4.5.1 System log
System log records the running status of W300D, such as ADSL dial-up
procedure and data packets records and so on. To view the log, please
follow the steps below.
1. Click “System Log” to enter the “System Log” screen and click the
radio button before “Enable” (Note: The function is disabled by system
default).
- 108 -
Page 109 / 139
ADSL2/2+ Router
2.
Click “View System Log” and you can check the logs on the
appearing screen.
4.5.2TR-069 client
TR-069 client is used to implement remote centralized management
over the W300D from the Internet (Note: to use this function, there must
be a remote centralized manager), the configuration steps are as
follows:
1. Click “TR-069 client” to enter the “TR-069 client – Configuration”
- 109 -
Page 110 / 139
ADSL2/2+ Router
screen.
2. Click “Enable” to open the function. The default is disabled.
3. Enter the Inform Interval, which is 300, ACS URL (the domain name
- 110 -
19216811.live