Tenda N60 Router Manual PDF (Setup & Configuration Guide)

Page 11 / 72 Scroll up to view Page 6 - 10

Concurrent Dual Band Wireless N600 Gigabit Router

Chapter 4 Configurations

This chapter delivers a detailed presentation of router’s functionalities and

features under 8 main menus below, allowing you to manage the router with ease.

During operation, if you are not clear about a certain feature, you can simply

click the “Help” button to read all related helpful info.

4.1 Device Info

WAN

This section allows you to view the router’s WAN info listed below:

WAN Status:

Displays WAN connection status: Disconnected, Connecting or

Connected.

Disconnected:

Indicates that the Ethernet cable from your ISP side is / is not

correctly connected to the WAN port on the router or the router is not logically

connected to your ISP.

Connecting:

Indicates that the WAN port is correctly connected and is requesting

an IP address from your ISP.

11

Page 12 / 72

Concurrent Dual Band Wireless N600 Gigabit Router

Connected:

Indicates that the router has been connected to your ISP.

±

Internet Connection Type:

Displays current Internet connection type.

±

WAN IP:

Displays WAN IP address.

±

Subnet Mask:

Displays WAN subnet mask.

±

Gateway:

Displays WAN gateway address.

±

DNS Server:

Displays WAN DNS address.

±

WAN MAC Address:

Displays router’s WAN MAC

address.

±

WAN Traffic:

Displays bandwidth currently used by router in KB/s.

±

Connection Duration:

Displays time duration indicating how long the router

has been connected to ISP.

±

WAN Traffic Graph:

Dis

plays

a graphic presentation of the traffic flow.

LAN

This section allows you to view the router’s LAN info listed below:

±

IP Address

：

Displays LAN IP address.

±

Subnet Mask:

Displays LAN subnet mask.

±

LAN MAC Address:

Displays router’s LAN MAC address.

±

DHCP Server:

Displays whether DHCP server is enabled or not.

±

NAT Entries/NAT:

Displays number of used NAT entries and MAX NAT entries.

Wireless

This section allows you to view the wireless info listed below:

12

Page 13 / 72

Concurrent Dual Band Wireless N600 Gigabit Router

±

Wireless Radio:

Displays whether wireless is enabled or not.

±

Wireless MAC address:

Displays MAC address of the router’s wireless interface.

±

SSID:

Displays current SSID.

±

802.11 Mode:

Displays currently active network mode.

±

Country:

Displays current country.

±

Channel:

Displays current channel.

±

Security Mode:

Displays current security Mode.

System Info

This section displays CPU/memory usage, uptime, system time, number of

connected client(s) and system version info.

±

CPU Usage

: Displays current CPU usage status.

±

Memory Usage

: Displays current memory usage status.

±

Up Time:

Displays uptime.

±

Time:

Displays device’s time synchronized with Internet or manually set by

user.

±

Connected Client(s)

：

Displays the number of connected computers.

±

Firmware Version

：

Displays router’s firmware version.

4.2 Network

“Network” includes the following four submenus. Clicking any of them enters

corresponding interface for configuration. Below explains, in details, each such

feature.

13

Page 14 / 72

Concurrent Dual Band Wireless N600 Gigabit Router

4.2.1

LAN Settings

±

IP Address:

Router’s LAN IP. The default is 192.168.0.1. You can change it

according to your need.

±

Subnet Mask:

Router’s LAN subnet mask.

Note:

1. If you change the device’s LAN IP address, you must enter the new one in your

browser to get back to the web-based configuration utility. And LAN PCs’ gateway

must be set to this new IP for successful Internet connection.

2. WAN IP, whether obtained automatically or specified manually, should NOT be on

the same IP net segment as the LAN IP, otherwise, the router will not work properly.

In case of emergency, press the hardware "Reset" button.

4.2.2

WAN Settings

The screen below displays WAN connection status and interface info.

Click the “Config” button to enter WAN configuration interface. The router supports

six Internet connection types, include Dynamic IP, Static IP, L2TP, PPTP, PPPoE, and

PPPoE dual access.

1)

Dynamic IP (DHCP):

Select this option to let router obtain IP settings

automatically from your ISP, if your ISP does not give you any IP information or

account information. You don’t need to configure any settings for this connection.

14

Page 15 / 72

Concurrent Dual Band Wireless N600 Gigabit Router

¾

Internet connection Type:

Displays a list of available Internet connection

types.

¾

MTU:

Maximum Transmission Unit. The default value is1500.

Note:

DO NOT change the factory default MTU value unless necessary as an improper

MTU value may degrade your network performance or even lead to network

malfunction.

2)

Static IP:

If your ISP offers you static IP Internet connection type, select “Static IP"

from corresponding drop-down menu and then enter IP address, subnet mask,

Primary

DNS

and

secondary

DNS

information

provided

by

your

ISP

in

corresponding fields.

±

Internet connection Type:

Displays a list of available Internet connection

types.

±

IP Address:

Enter the WAN IP address provided by your ISP. Inquire your ISP if

you are not clear.

±

Subnet Mask:

Enter WAN Subnet Mask provided by your ISP.

±

Default Gateway:

Enter the WAN Gateway address provided by your ISP.

±

Primary DNS Server:

Enter the necessary DNS address provided by your ISP.

±

Secondary DNS Server:

Enter the other DNS address if your ISP provides you

with 2 such addresses, and it is optional.

15

Rate

Popular Tenda Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share