Page 41 / 90
Scroll up to view Page 36 - 40
D810R ADSL2+ Router User Guide
MER mode
1)
Select “MAC
Encapsulation
Routing(MER)”.
Encapsulation Mode:
VC/MUX
LLC/SNAP-BRIDGING
Once you select one
mode, the system
automatically changes
the encapsulation
mode into the one
matching your setting.
Therefore, it is
recommended to keep
the default setting
unchanged.
36
Page 42 / 90
D810R ADSL2+ Router User Guide
2)
Click “Next” to display
the window shown in
the right figure.
a.
Obtain an IP address
automatically:
If your device
automatically obtains
the IP address, the IP
address and other
parameters will be from
your ISP automatically.
b.
Use the following IP
address:
To manually specify an
address, you need to
check this option and
enter your static IP
address and subnet
mask.
c.
Obtain default gateway
automatically:
If this option is
checked, the device
automatically obtains
37
Page 43 / 90
D810R ADSL2+ Router User Guide
the default gateway
address from the
upstream device.
3)
Use the following
default gateway: To
manually enter a
gateway, check this
option.
a.
Use IP Address:
After checking “Use
the following default
gateway”, you can
enter a value here.
b.
Use WAN Interface:
For the broadband
access device, you
need to enter the IP
address of the
downstream link
interface.
4)
Obtain DNS server
address automatically:
If this option is
checked, the device
38
Page 44 / 90
D810R ADSL2+ Router User Guide
automatically obtains
the DNS address.
5)
Use the following DNS
server address:
To manually enter a
DNS address, check
this option.
a.
Primary DNS server:
Enter the primary DNS
server.
b.
Secondary DNS server:
Enter the secondary
DNS server.
6)
Click “Next”.
a.
Enable IGMP Multicast:
IGMP agent. For
example, to enable the
IPTV in the PPPoE
mode, you need to
check this option.
b.
Enable WAN Service:
Checked by default. It
is recommended to
keep this default
39
Page 45 / 90
D810R ADSL2+ Router User Guide
setting, unless you
do not need to
activate your WAN.
7)
Click “Next” to display
the window shown in
the right figure. This
window lists your
settings.
6.
Click “Save/Reboot”
to activate your
settings.
IPoA mode
40
19216811.live