Page 81 / 103 Scroll up to view Page 76 - 80
Wireless Modem Router User Guide
- 81 -
First/Second/Third/Fourth/Fifth NTP time server:
Select a NTP time server from the drop-down list. If the NTP time
server you are looking for is not included in the list, select “Other” and then enter it manually in the box.
Time zone offset:
Select your time zone from the drop-down list.
4.5.7 Access Control
This section explains the following information:
Password
AccessControl - Service
Password
Access to your broadband router is controlled through three user accounts: admin, support, and user.
The user name "admin" has unrestricted access to change and view configuration of your Broadband Router.
The user name "support" is used to allow an ISP technician to access your Broadband Router for maintenance and to run
diagnostics.
The user name "user" can access the Broadband Router, view configuration settings and statistics, as well as, update the
router's software.
User Name:
Enter the user name of up to 16 characters.
Old Password:
Enter the old password of up to 16 characters.
New Password:
Enter a new password of up to 16 characters.
Confirm Password:
Re-enter to confirm the new password.
Apply/Save:
Click to change or create passwords.
_________________________________________________________________________________________________
Note:
Password cannot contain a space.
_________________________________________________________________________________________________
AccessControl - Service
Here you can manage the device either from LAN or WAN side using HTTP, ICMP, TELNET, SNMP and FTP.
Page 82 / 103
Wireless Modem Router User Guide
- 82 -
_________________________________________________________________________________________________
Note:
1.
If you are not an advanced user, we suggest you keep the default settings.
2.
To access the device from the LAN side, you must use the LAN IP address and log in as "admin" or "user"; to access
the device from the WAN side, you must use the WAN IP address and log in as "support".
_________________________________________________________________________________________________
4.5.8
Update Software
Firmware upgrade is released periodically to improve the functionality of your device and add any new features. If you
run into a problem with a specific feature of the device you could log in to our website (www.tendacn.com) to download
the latest firmware to update your device.
To update software, do as follows:
1.
Obtain an updated software image file from our website:
www.tendacn.com
.
2.
Enter the path to the image file location in the box below or click the "Browse" button to locate the image file.
3.
Click the "Update Software" button once to upload the new image file.
_________________________________________________________________________________________________
Note:
The update process takes about 2 minutes to complete, and your Broadband Router will reboot.
_________________________________________________________________________________________________
Page 83 / 103
Wireless Modem Router User Guide
- 83 -
4.5.9 Reboot
Click the Reboot button to reboot the router.
Page 84 / 103
Wireless Modem Router User Guide
- 84 -
Appendix 1 Configure Your PC
Screens to configure TCP/IP properties in other Operating Systems are similar to those below.
Windows 7
Click
Start->
Control Panel-> Network and Sharing Center-> Change adapter settings
, select a desired
Local Area
Connection
and
select
Properties.
Page 85 / 103
Wireless Modem Router User Guide
- 85 -

Rate

4.5 / 5 based on 2 votes.

Popular Tenda Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top