Tenda D301 Router Manual PDF (Setup & Configuration Guide)

Page 76 / 103 Scroll up to view Page 71 - 75

Wireless Modem Router User Guide

- 76 -

4.3.5 Station Info

This page shows authenticated wireless stations and their status.

4.4 Diagnostics

The modem router is capable of testing the connection to your DSL service provider, the connection to your Internet

service provider and the connection to your local network. If a test displays a fail status, click "Rerun Diagnostic Tests"

at the bottom of this page to make sure the fail status is consistent. If the test continues to fail, click "Help" and follow

the troubleshooting procedures.

4.5 Management

This section explains the following information:

•

Settings

•

System Logs

•

Security Log

•

SNMP Agent

•

TR-069 Client

•

Internet Time

•

Access Control

•

Update Software

•

Reboot

4.5.1 Settings

This section explains the following information:

•

Backup

•

Update

Page 77 / 103

Wireless Modem Router User Guide

- 77 -

•

Restore Default

Backup

Here you can save a copy of your device’s configurations to your computer.

Once you have configured the device

, you

can save these settings to a configuration file on your local hard drive. The configuration file can later be imported to

your device in case the device is reset to factory default settings.

Update

Here you can restore the configuration from a file saved on your PC.

Restore Default

Under some circumstances (for example, join a different network or unfortunately forgetting the login password), you

may need to remove the existing configuration and restore the factory default settings.

Page 78 / 103

Wireless Modem Router User Guide

- 78 -

4.5.2 System Logs

The System Log dialog allows you to view the System Log and configure the System Log options.

To view the System Log, simply click

View System Log

.

To configure the System Log options, click

Configure System Log

.

Log:

If Enable is selected, the system will begin to log all the selected events.

Log Level:

All events above or equal to the selected level will be logged.

Display Level:

All logged events above or equal to the selected level will be displayed.

Mode:

If the selected mode is 'Remote' or 'Both,' events will be sent to the specified IP address and UDP port of the

remote syslog server. If the selected mode is 'Local' or 'Both,' events will be recorded in the local memory.

Page 79 / 103

Wireless Modem Router User Guide

- 79 -

Server IP Address:

Specify the IP address of the remote syslog server.

Server UDP Port:

Specify the UDP port of the remote syslog server.

Apply/Save:

click to apply and save the system log settings.

4.5.3 Security Log

The Security Log page allows you to view the Security Log and configure the Security Log options. You can also save

Security Log to a file.

View:

Click to view the Security Log.

Reset:

Click to clear and reset the Security Log.

4.5.4 SNMP Agent

Simple Network Management Protocol (SNMP) allows a management application to retrieve statistics and status from

the SNMP agent in this device.

SNMP Agent

：

Select “Enable” to activate the SNMP Agent feature or “Disable” to deactivate it.

Read Community:

Specify a Read Community string. The default is public.

Set Community:

Specify a Set Community string. The default is private.

System Name:

Specify a descriptive system name.

System Location:

Specify a system location.

System Contact:

Specify a system contact.

Trap Manager IP:

Specify the IP address of the Trap Manager.

Page 80 / 103

Wireless Modem Router User Guide

- 80 -

4.5.5 TR-069 Client

WAN Management Protocol (TR-069) allows a Auto-Configuration Server (ACS) to perform auto-configuration,

provision, collection, and diagnostics to this device.

Click the

TR-069 Client

tab to enter the TR-069 Client configuration screen as seen below:

Inform

：

Select

Enable/Disable

to enable/disable the

TR-069 Client

function. By default, it is disabled.

Inform Interval:

Specify the inform interval.

ACS URL:

Enter the ACS (Auto-Configuration Server) URL address.

ACS User Name:

Enter the ACS (Auto-Configuration Server) user name.

ACS Password:

Enter the ACS (Auto-Configuration Server) password.

WAN Interface used by TR-069 client:

Select the WAN interface used by the TR-069 client from the drop-down list.

Display SOAP messages on serial console:

If

Enable is selected, SOAP messages will be displayed on

serial console; if Disable

is

selected, SOAP messages will not be displayed on

serial console.

Connection Request Authentication:

Check/uncheck to enable/disable the cnnection request authentication.

Connection Request User Name:

Enter the

cnnection request user name.

Connection Request Password:

Enter the cnnection request password.

Connection Request URL:

Specify the connection request URL.

4.5.6 Internet Time

This page is used to set the ro

uter’s system time. If

Automatically synchronize with Internet time servers

is checked, the system

will automatically connect to NTP server to synchronize the time.

Rate

Popular Tenda Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share