Page 101 / 135
Scroll up to view Page 96 - 100
Wireless AC1750 Dual-band Gigabit Router
100
12. Click “Browse”, select corresponding drive file and click
“Open”. At last click “OK”.
13. Click “Next”.
14. Define a name for the printer and click “Next”.
Page 102 / 135
Wireless AC1750 Dual-band Gigabit Router
101
15. Click "Finish".
8.3 DLNA
The (DLNA) is responsible for defining interoperability guidelines
to enable sharing of digital media such as music, photos and
Page 103 / 135
Wireless AC1750 Dual-band Gigabit Router
102
videos between consumer devices such as computers, TVs,
printers, cameras, cell phones, and other multimedia devices.
Enable: Check to enable the DLNA feature;
Media Server Name: This option is configurable. You can
change it according to your own needs.
For example: To play multimedia files that are stored on a USB
storage attached to the device on your smart phone. Do as
follows:
1.
Connect the USB storage to the device.
2.
Enable the DLNA feature on the device.
3.
Change the DLNA server name if you like.
4.
Start the DLNA client on your smart phone to perform a
scan.
5.
Select a multimedia file to play on your smart phone.
CHAPTER 9 IPTV
The IPTV feature makes it possible to enjoy online videos on
your TV set via a set-top box while surfing Internet concurrently
without mutual interference.
Page 104 / 135
Wireless AC1750 Dual-band Gigabit Router
103
Enable: Check/uncheck to enable/disable the IPTV feature.
Multicast IPTV is supported in this mode and IPTV port is
still functioning as a LAN port.
Enable IPTV STB Port: Check/uncheck to enable/disable
the IPTV-specific port. This mode applies to various forms of
IPTV and the IPTV port only provides IPTV service instead
of as a LAN port.
See below for the network topology:
Page 105 / 135
Wireless AC1750 Dual-band Gigabit Router
104
Note:
1.
If you enabled both options mentioned above, then note
below: (a). Set IPTV set-top box's connection type to
DHCP/dynamic IP or static IP (IMPORTANT: Note that the
set-top box's IP address should be on the same IP net
segment as router’s LAN
IP.) if the set-top box is connected
to any port of LAN ports 1-3. (b). Select the dialup mode
provided by your ISP if the set-top box is connected to the
IPTV-specific port.
2.
After the IPTV port is set for IPTV purpose, PC that connects
to such port will not be able to obtain an IP address or
access Internet. So think twice before you start. Plus, LAN
ports1-3 can only be used as LAN ports to connect PCs
instead of an IPTV set-top box.
19216811.live