Page 81 / 135
Scroll up to view Page 76 - 80
Wireless AC1750 Dual-band Gigabit Router
80
Security Mode: Select a proper security mode from the
drop-down list.
Cipher Type: Select AES (advanced encryption standard) or
TKIP (temporary key integrity protocol) &AES.
Security Key: Enter a security key, which must be between
8-63 ASCII characters long.
Key Renewal Interval: Enter a valid time period for the key.
3
、
Mixed WPA/WPA2-PSK
Mixed WPA/WPA2-PSK provides both WPA-PSK
WPA2-PSK security modes with AES, TKIP and TKIP&AES
cipher types.
Page 82 / 135
Wireless AC1750 Dual-band Gigabit Router
81
Security Mode: Select a proper security mode from the
drop-down list.
Cipher Type: Select AES (advanced encryption standard),
TKIP or TKIP (temporary key integrity protocol) &AES.
Security Key: Enter a security key, which must be between
8-63 ASCII characters long.
Key Renewal Interval: Enter a valid time period for the key.
7.3 WPS
Wi-Fi Protected Setup makes it easy for home users who know
little of wireless security to establish a secure wireless home
network, as well as to add new devices to an existing network
without entering long passphrases or configuring complicated
settings. Simply enter a PIN code or press the software PBC
button or hardware WPS button (if any) and a secure wireless
connection is established.
Page 83 / 135
Wireless AC1750 Dual-band Gigabit Router
82
Enable WPS: Select to enable/disable the WPS encryption.
WPS Mode: Select PBC (Push-Button Configuration) or PIN.
Reset OOB: When clicked, the WPS LED turns off; WPS
function will be disabled automatically; WPS server on the
Router enters idle mode and will not respond to client’s WPS
connection request.
Operation Instructions:
PBC: (Before you start the following operations, make sure you
have enabled the WPS feature on the device from the web utility.)
Press the hardware WPS button on the device for 1 second and
if the WPS LED keeps blinking for about 2 minutes, it indicates
that PBC encryption mode is successfully enabled. And an
authentication will be performed between your device and the
other WPS/PBC-enabled wireless client during this time; if it
succeeds, the wireless client connects to your device, and the
WPS LED turns off. Repeat steps mentioned above if you want to
add more wireless clients to the device.
PIN: To use this option, you must know the PIN code from the
Page 84 / 135
Wireless AC1750 Dual-band Gigabit Router
83
wireless client and enter it in the corresponding field on your
device while using the same PIN code on client side for such
connection.
Note:
To use the WPS encryption, the wireless adapter must
be WPS-capable. The PIN code can be found on the label
attached to device.
7.4 WDS
WDS (Wireless Distribution System) feature can be used to
extend your existing 2.4G or 5G wireless network coverage.
Here we present you how to config such feature in 2.4GHz,
which also applies to 5GHz.
Select 2.4G WDS or 5G WDS.
WDS Mode: Select Disable or Repeater Mode.
AP MAC address: Displays the MAC address of the router
Page 85 / 135
Wireless AC1750 Dual-band Gigabit Router
84
that is successfully bridged.
For example: select Repeater Mode and click Open Scan to scan
all available wireless networks (To ensure that both devices
involved communicate through the same channel, set the
channel to "Auto" before scanning.).
Simply check the wireless network you want to connect to. After
successfully completing settings on the Device, repeat above
operations on the other device. When the two devices added
each other's MAC address, the WDS may be implemented
successfully.
Note:
1. WDS feature can only be implemented between 2
WDS-capable wireless devices. Plus, SSID, channel, security
19216811.live