Page 61 / 145
Scroll up to view Page 56 - 60
61
7.3.2.2
Advanced settings
You can also define some advanced options that specify how the DHCP server will operate on your LAN network.
7.3.2.3
Static Leases
This page is used to configure static IP leases.
7.3.2.4
IP Aliases
7.3.2.4.1
General Setup
IP aliases are the way of defining or reaching a subnet that works in the same space as the regular network.
Field Name
Sample Value
Explanation
1.
Dynamic DHCP
Checked/Unchecked
Dynamically allocate client addresses, if set to
0
only clients present
in the
ethers
files are served
2.
Force
Checked/Unchecked
Forces DHCP serving even if another DHCP server is detected on the
same network segment.
3.
IP netmask
You can override your LAN netmask here to make the DHCP server
think it’s serving a larger or a smaller network than it actually is.
4.
DHCP Options
Additional options to be added for this DHCP server. For example
with '26,1470' or 'option:mtu, 1470' you can assign an MTU per
DHCP. Your client must accept MTU by DHCP for this to work.
Field Name
Sample Value
Explanation
1.
Hostname
Printer
Name which will be linked with IP address.
2.
MAC address
10:a5:d0:70:9c:72 (192.168.1.104)
Device MAC address
3.
IP address
192.168.1.104
Device IP address
Page 62 / 145
62
7.3.2.4.2
Advanced Settings
You may also optionally define a broadcast address and a custom DNS server.
Page 63 / 145
63
7.4
Wireless
On this page you can configure your wireless settings. Depending on whether your WAN mode is set to Wi-Fi or
not, the page will display either the options for configuring an
Access Point
or options for configuring a
connection
to
some local access point.
Access Point:
Here you can see the Overview of the wireless configuration. It is divided into two main sections
–
device and
interface. One is dedicated to configuring hardware parameters other
–
software.
Here you can toggle the availability of the wireless radio and the physical channel frequency.
Important note
: As seen in the picture you should always
Save
before toggling the radio on and off.
SSID
–
Your wireless networks identification string. This is the name of your Wi-Fi network. When other Wi-Fi
capable computers or devices scan the area for Wi-Fi networks they will see your network with this name.
Hide SSID
–
Will render your SSID hidden from other devices that try to scan the area.
Connect to WRP100 automatically
–
let Teltonika WRP100 wireless repeater connect to this router automatically.
Page 64 / 145
64
7.4.1.1
Device
7.4.1.1.1
Advanced Settings
Here you can configure more advanced parameters:
Field name
Sample value
Explanation
1.
Mode
Auto, b, g, g+n
Different modes provide different throughput and security
options.
2.
Country Code
Any ISO/IEC 3166 alpha2
country code
Selecting this will help the wireless radio configure its
internal
parameters
to
meet
your
countries
wireless
regulations.
3.
Transmit power
20%/40%/60%/80%/100%
Select Wi-Fi signal power
4.
Fragmentation
threshold
2346
The smallest packet size that can be fragmented and
transmitted by multiple frames. In areas were interference is
a problem, setting a lower fragment threshold might help
reduce the probability of unsuccessful packet transfers, thus
increasing speed.
5.
RTS/CTS Threshold
2346
Request to send threshold. It can help resolve problems
arising when several access points are in the same area,
contending.
7.4.1.2
Interface
7.4.1.2.1
Security
Encryption
–
there are many modes of encryption, a distinctive classis pointed out below.
Page 65 / 145
65
First select an encryption method: TKIP, CCMP, TKIP&CCMP and auto. Note: Some authentication methods won’t
support TKIP (and TKIP&CCMP) encryption.
After you’ve selected your encryption method, you should enter your pass
phrase, which must be at least 8 characters long.
7.4.1.2.2
MAC-Filter
Filter
–
you can define a rule for what to do with the MAC list you’ve defined. You can either allow only the listed
MACs or allow ALL, but forbid only the listed ones.
7.4.1.2.3
Advanced settings
Separate clients
–
prevents Wi-Fi clients from communicating with each other on the same subnet.
Increase TTL packet size
–
increase TTL packet size for incoming packets.
7.4.1.3
Client
RUT9xx can work as a Wi-Fi client. Client mode is nearly identical to AP, except for the fact that most for the
options are dictated by the wireless access point that the router is connecting to. Changing them can result in an
interrupted connection to an AP.
In addition to standard options you can also click the
Scan
button to rescan the surrounding area and attempt to
connect to a new wireless access point.
19216811.live