Page 126 / 165
Scroll up to view Page 121 - 125
Telsey
telecommunications
Command Line Interface
MT500--SIEN12
118
route add 192.56.76.0 255.255.255.0 br0
Add route to to gateway 10.6.33.129 for network 192.57.66.x.
route add 192.57.66.0 255.255.255.0 10.6.33.129
OUTPUT:
The output of the kernel routing table is organized in the following columns
Destination
The destination network or destination host.
Gateway
The gateway address or * if none set.
Genmask
The netmask for the destination net; 255.255.255.255 for a host
destination and 0.0.0.0 for the default route.
Flags Possible flags include
U (route is up)
H (target is a host)
G (use gateway)
R (reinstate route for dynamic routing)
D (dynamically installed by daemon or redirect)
M (modified from routing daemon or redirect)
FILES:
/proc/net/route
/proc/net/rt_cache
Page 127 / 165
Telsey telecommunications
Command Line Interface
119
MT500--SIEN12
SAVE
NAME:
save
- save current configuration to Permanent Storage on the flash memory
SYNOPSIS:
save
DESCRIPTION:
save
is a CLI command used to save current configuration to flash.
COMMANDS:
None
OPTIONS:
None
EXAMPLES:
Save all current configuration to flash.
save
Page 128 / 165
Telsey
telecommunications
Command Line Interface
MT500--SIEN12
120
SWVERSION
NAME:
swversion
- display current running software version
SYNOPSIS:
swversion show
DESCRIPTION:
swversion is a CLI command used to view the current running software version.
COMMANDS:
None
OPTIONS:
None
EXAMPLES:
Display current software version.
swversion show
1.00.00.a0_23a
Page 129 / 165
Telsey telecommunications
Command Line Interface
121
MT500--SIEN12
SYSINFO
NAME:
sysinfo
- display the general system information
SYNOPSIS:
sysinfo
DESCRIPTION:
sysinfo displays the number of processes in the system, system time, system
uptime, the average system load in the past 1, 5 and 15 minutes, and the
system memory consumption. The figures in the memory consumption table
are in 1kb unit.
COMMANDS:
None.
OPTIONS:
None.
EXAMPLES:
Display the system information
sysinfo
Page 130 / 165
Telsey
telecommunications
Command Line Interface
MT500--SIEN12
122
TFTPPROV
NAME:
tftpprov
- automatic provisioning via tftp command
SYNOPSIS:
tftpprov enable [--static [-s <address>] [-f <filename>] [-
c <cfginterval>]] [--dynamic [-c <cfginterval>]]
DESCRIPTION:
tftpprov
enables the configuration via TFTP. It can be either static or
dynamic (via DHCP options).
COMMANDS:
Static configuration:
tftpprov enable --static [-s <address>]
[-f <filename>] [-c
<cfginterval>]
Dynamic mode (via DHCP). The option 66 and 67 contains the information
about TFTP Server and Filename that will be used to configure CPVA500. This
parameter will not be saved in flash:
tftpprov enable --static
--dynamic [-c <cfginterval>]]
Save
the parameters and configuration:
tftpprov save
Show
the parameters:
tftpprov show
Disable
the provisioning:
tftpprov disable
OPTIONS:
See above.
EXAMPLE:
See configuration file example in the Web Interface chapter.
19216811.live