19216811.live131
Name
: user-defined name for identification.
L2TP over IPSec
: If your L2TP server has used L2TP over IPSec feature, please enable this item.
Under this circumstance, client and server communicate using L2TP over IPSec.
i
Enable
IPSec Tunnel:
Select the appropriate IPSec for L2TP rule configured for the L2TP Client.
Username
: Enter the username provided by your L2TP Server.
Password:
Enter the password provided by your L2TP Server.
Auth. Type
: Default is Pap or CHap if you want the router to determine the authentication type to use,
or else manually specify CHAP (Challenge Handshake Authentication Protocol) or PAP (Password
Authentication Protocol) if you know which type the server is using. When using PAP, the password is
sent unencrypted, whilst CHAP encrypts the password before sending, and also allows for challenges
at different periods to ensure that an intruder has not replaced the client.
L2TP Server Address: Enter the IP address of the L2TP server.
Connection Type:
Select Remote Access for single user, Select LAN to LAN for remote gateway.
Peer Network IP
: Please input the subnet IP for Server.
Peer Netmask
: Please input the Netmask for Server.
Tunnel Authentication: Select whether to enable L2TP tunnel authentication, if the server side enables
this feature, please follow.
Secret
: Enter the set secret password in the server side.
Remote Host Name
: Enter the remote host name featuring the destination of the L2TP tunnel.
Local Host Name
: Enter the local host name featuring the source of the L2TP tunnel. Click Add button
to save your changes.