19216811.live76
Port:
the port, default is 25.
Account Test:
Press this button to test the connectivity and feasibility to your sender’s e-mail.
Recipient’s Email (WAN IP Change Alert):
Enter the email address that will receive the alert
message once a WAN IP change has been detected.
SMS Alert
SMS, Short Message Service, is to inform clients the information clients subscribe. The TeleWell
TW-EAV510v2 offers SMS alert sending clients alert messages when a WAN IP change is detected.
Recipient’s Number (WAN IP Change Alert):
Enter the Recipient’s number that will receive the alert
message once a WAN IP change has been detected.
Configure Log
Log
: Enable or disable this function.
Log level
: Select your log level. The log level allows you to configure which types of events are
logged. There are eight log levels from high to low are displayed below:
i
Emergency = system is unusable
i
Alert = action must be taken immediately
i
Critical = critical conditions
i
Error = error conditions
i
Warning = warning conditions
i
Notice = normal but significant conditions
i
Informational = information events
i
Debugging = debug-level messages
The gateway records all log events at the chosen level and above. For instance, if you set the log level
to Critical, all critical, alert, and emergency events are logged, but none of the others are recorded
Display Level: Display the log according to the level you set when you view system log. Once you set
the display level, the logs of the same or higher priority will be displayed.
Mode
: Select the mode the system log adopted. Three modes: local, Remote and Both.
i
Local: Select this mode to store the logs in the router’s local memory.
i
Remote: Select this mode to send the log information to a remote log server. Then you
must assign the remote log server and port, 514 is often used.
i
Both: Logs stored adopting above two ways.
Click Apply to save your settings.