56

opens;

Note:

Configuring the system log should be done with assistance from your ISP.

Security Log

The System Log windows enable you view the security log of this device.

Select

Security Log

in the

Management

menu to open the Security Log window;

If you clicked

View

in the

Security Log

window, the Security Log information window opens;

57

TR069 client

The TR-069 Client window enables you to configure the ACS for this device

Select

TR-069 Client

in the

Management

menu to open the TR-069 Client-Configuration

window;

Internet Time

To access the

Time

settings

window, click the

Internet Time

button in the

Management

directory.

This window allows you to set the Router’s time configuration. When you are finished, click the

Save/Apply

button.

58

Access Control

To access the

Access Control

windows, click the

Access Control

button in the

Management

directory.

Passwords

This window allows you to change the password on the Router. When you are finished, click

the

Save/Apply

button.

Services

The Services window enables you to enable or disable services

Select

Services

from the

Access Control

menu to open the Services window

59

IP Addresses

The IP Address Access Control mode, if enabled, permits access to local management

services from IP addresses contained in the Access Control List. If the Access Control mode is

disabled, the system will not validate IP addresses for incoming packets. The services are the

system applications listed in the Service Control List.

To access this window, click the

IP addresses

button in the

Access Control

directory.

Click the

Add

button, access the following window displayed on the next page.

60

Input the IP Address and Subnet Mask which you want to configure, and then click

Apply

to

enable this IP Address.

Reboot

To access this window, click the

Reboot

button in the

Management

directory.

To save your settings and reboot the system, click the

Reboot

button.

Tools

This page will help you to diagnostic the status of your Network. You can use “Ping”, “Trace

Route” and “Nslookup” methods in this page. After you input the IP address or Domain name,

click "

Ping

”, "

Trace Route

" or "

Nslookup

" button.