Page 16 / 98 Scroll up to view Page 11 - 15
10
1 GETTING STARTED
DMS-CTC-20101206-0017 v2.0
1.3.4 Buttons
Overview
WPS button
The WPS (
) button allows you to add new wireless clients to your network in a swift and easy way, without the need to
enter any of your wireless settings manually.
For more information, see
“5.1 Connecting Your Wireless Client via WPS” on page 40
.
ECO button
The
ECO
(
) button allows you to disable your wireless access point. You can do this when you do not have any devices
that are connected to the wireless access point. This allows you to save the energy that the Technicolor Gateway would be
using for the wireless access point. For more information, see
“ECO button” on page 47
.
The LED on the ECO button summarizes the overall status of your Technicolor Gateway.
Reset button
The Reset button allows you to reset your Technicolor Gateway to factory defaults.
For more information, see
“10.6 Reset to Factory Defaults” on page 89
.
Reset
Colour
State
Description
Green
Solid on
All services are available. The wireless access point is
enabled
.
Blue
Solid on
All services are available. The wireless access point is
disabled
.
Red
Solid on
Some services are not available. The Technicolor Gateway automatically
activates the other status LEDs to allow you to see which services are
running.
Blinking
The Technicolor Gateway is starting up.
Off
The Technicolor Gateway is powered off.
Page 17 / 98
11
1 GETTING STARTED
DMS-CTC-20101206-0017 v2.0
1.3.5
Status LEDs
Introduction
On the front panel of your Technicolor Gateway, you can find a number of status LEDs, indicating the state of the device.
ECO button LED
The ECO (
) button LED provides information about the overall state of your Technicolor Gateway. For more
information, see
“ECO button” on page 10
.
Ethernet LED
Wireless LED
Internet
Broadband
Wireless
Ethernet
WPS
ECO
The other status LEDs are only activated when the Internet service is down.
Colour
State
Description
Green
Solid on
Network device connected to the Ethernet switch.
Blinking
Network device connected to the Ethernet switch and sending/receiving
data.
Off
No Ethernet connection on your local network
Colour
State
Description
Green
Solid on
Wireless clients connected, no wireless activity
Blinking
Wireless clients connected, wireless activity
Off
No wireless clients connected or wireless access point disabled
Page 18 / 98
12
1 GETTING STARTED
DMS-CTC-20101206-0017 v2.0
Broadband LED (if you are using the
DSL Gateway
scenario)
Broadband LED (if you are using the
Local Router
scenario)
Internet LED
WPS LED
For more information about WPS, see
“5.1 Connecting Your Wireless Client via WPS” on page 40
.
Colour
State
Description
Green
Solid on
DSL line synchronised
Blinking
Trying to detect carrier signal or pending DSL line synchronisation
Off
Technicolor Gateway powered off.
Colour
State
Description
Green
Solid on
Connected to the WAN device
Off
Not connected to the WAN device
Colour
State
Description
Green
Solid on
Connected to the Internet, no activity
Blinking
Connected to the Internet, sending/receiving data
Red
Solid on
Failed to setup the Internet connection
Off
No Internet connection
Colour
State
Description
Green
Solid On
Client successfully registered via WPS
Orange
Blinking
WPS registration ongoing
Red
Blinking
Error occurred
Page 19 / 98
13
1 GETTING STARTED
DMS-CTC-20101206-0017 v2.0
1.4
Preparing for the Installation
DSL service requirements
This section is only applicable if you are using your Technicolor Gateway as DSL gateway. For more information, see
“1.2 User Scenarios” on page 5
.
Make sure that:
Your service provider activated the DSL service on your telephone line by your service provider.
You have the installation information (for example, user name, password, service profile,...) provided by your service
provider at hand.
Local connection requirements
Wireless connection
If you want to connect your computer using a wireless connection, your computer must be equipped with a WiFi-certified
wireless client adapter.
Wired connection
If you want to connect a computer using a wired connection, your computer must be equipped with an Ethernet Network
Interface Card (NIC).
Start with the installation
You are now ready to start with the installation of your Technicolor Gateway.
Page 20 / 98
14
1 GETTING STARTED
DMS-CTC-20101206-0017 v2.0

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top