Page 51 / 98 Scroll up to view Page 46 - 50
45
6 SAVING ENERGY
DMS-CTC-20101206-0017 v2.0
6
Saving Energy
Code of Conduct
To prove its commitment to protect the environment, Technicolor has signed the Code of Conduct, a global agreement to
reduce the power consumption of broadband access devices.
For more information, see
“6.1 Code of Conduct” on page 46
.
Technicolor power saving innovations
To further reduce the power consumption, Technicolor has developed the
ECO Manager
. This system constantly monitors
the services provided by the Technicolor Gateway and automatically switches unused services to an ECO-friendly state. For
more information, see
“6.2 ECO Manager” on page 47
.
Page 52 / 98
46
6 SAVING ENERGY
DMS-CTC-20101206-0017 v2.0
6.1
Code of Conduct
Power states
Code of Conduct provides rules for the power consumption in:
Full power state:
This is the normal operation mode of the device, where all functionality is enabled.
Low power state:
When there is no user traffic on the device, the device should switch to low power mode. This is a state in which devices
are only allowed to use a limited amount of energy to be able to power its components and respond to user activity.
Example
Take the following example:
The user switches off his computer at 20:00.
There are no other devices connected to the Technicolor Gateway.
The Technicolor Gateway switches to low power mode. This results in a considerable drop in the overall power consumption
of the Technicolor Gateway.
No user traffic
User traffic
Time
Power
Consumption
Full power limit
Low power limit
20:00
Page 53 / 98
47
6 SAVING ENERGY
DMS-CTC-20101206-0017 v2.0
6.2
ECO Manager
Introduction
The Technicolor Gateway constantly monitors the user activity and uses this information to optimise the power
consumption:
For example:
The Technicolor Gateway
reduces the clock frequency of the central processor
when there is no or low user activity. This
lowered clock frequency will result in a lower power consumption of the Technicolor Gateway.
Switch the wireless interface to power reduction mode
.
Wireless access point power reduction mode
When the Technicolor Gateway access point switches to power reduction mode, the access point is switched off and is only
power on periodically to be able to detect new clients. If new clients are detected the wireless access point is fully powered
again. This is only possible if there are no devices connected to the Technicolor Gateway.
Power reduction is enabled by default, but it is possible to disable it via the Technicolor Gateway GUI. To configure power
reduction:
1
Browse to the Technicolor Gateway GUI.
For more information, see
“Accessing the Technicolor Gateway GUI” on page 33
.
2
Under
Home Network
, click
Wireless
.
3
In the
Navigation bar
, click
Configure
.
4
Under
Configuration
:
Select
Power Reduction Enabled
to enable power reduction.
Clear
Power Reduction Enabled
to disable power reduction.
5
Click
Apply
.
Example
If we use the same example as in the previous section, you can see that the Technicolor Gateway is now able to further
reduce the power consumption in periods where less action is required from the Technicolor Gateway.
ECO button
If you are not using the wireless access point of your Technicolor Gateway, you might consider to disable the wireless access
point permanently. This allows you to further reduce the power consumption.
To turn the wireless interface:
Off
, press the
ECO
(
) button until the
ECO
LED turns blue or the Wireless LED is off.
No User Traffic
User Traffic
Time
20:00
Time
Power
Consumption
Full power limit
Low power limit
Page 54 / 98
48
6 SAVING ENERGY
DMS-CTC-20101206-0017 v2.0
On
, press the
ECO
(
) button until the
ECO
LED turns green or the Wireless LED is on.
Zero power consumption
If you will not be using your Technicolor Gateway for a longer time (for example: you are going on holiday), you should
consider to turn off the Technicolor Gateway. This way no energy will be consumed at all.
However, be aware that if you turn off the Technicolor Gateway,
all services provided by the Technicolor Gateway that
require access to the Internet will not be available
. For example:
You will not be able to browse to Internet websites, listen to radio streams etc.
No Digital TV is provided
If your set-top box is connected to your Technicolor Gateway, it will no longer be able to connect to the Internet, hence
not be able to service your TV set.
Page 55 / 98
49
7 SHARING CONTENT
DMS-CTC-20101206-0017 v2.0
7
Sharing Content
Introduction
The Technicolor Gateway allows you to share the content stored on your USB storage device with other users on your
network or even access this shared content from the Internet.
Features
The Technicolor Gateway supports USB 2.0
The following file systems are supported:
NTFS (optional)
FAT32
FAT16
HFS+ (optional)
EXT2/EXT3 (optional)
You can connect up to five USB storage devices (via a USB hub).
Each USB storage device can have up to 10 partitions. If your device has more partitions the extra partitions will be
ignored.
Content Sharing Servers
The Technicolor Gateway offers three types of services to share your content. The following table gives a you a brief
overview of the main functions:
Network File Server
UPnP AV Media Server
FTP Server
Function
Store and access your data
on your local network.
Make media files available
for UPnP AV capable
devices like Media players,
Set-Top boxes from your
local network.
Store and access your data
from the Internet.
Access
Read and write
Read-only
Read and write
Accessible from
Local network
Local network
Internet
and Local network
Type of content shared
All files from all partitions
and disks that are
connected.
Media
files (music, movies
and pictures) from all
partitions and disks that are
connected.
All files that are stored in
the
Shared
folder of the
managed partition.
For more information,
see...
“7.1 The Network File
Server” on page 51
“7.2 The UPnP AV Media
Server” on page 54
“7.3 The FTP Server” on
page 58

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top