Page 31 / 94
Scroll up to view Page 26 - 30
25
3 MANUAL INSTALLATION
DMS-CTC-20101206-0009 v1.0
3.5.2
Inserting a Mobile USB Adapter
Procedure
Once the mobile connection is configured you can proceed as follows to insert the mobile USB adapter:
1
Power off the Technicolor Gateway.
2
Insert your SIM card into the mobile USB adapter.
3
Plug the mobile USB adapter in (one of) the USB port(s) of your Technicolor Gateway:
4
Power on the Technicolor Gateway.
If you do not power off the Technicolor Gateway first, the mobile USB adapter will not be detected.
Page 32 / 94
26
3 MANUAL INSTALLATION
DMS-CTC-20101206-0009 v1.0
Page 33 / 94
27
4 CONFIGURATION TOOLS
DMS-CTC-20101206-0009 v1.0
4
Configuration Tools
Configuration Tools
You can use the following tools to configure your Technicolor Gateway:
The Technicolor Gateway Setup CD allows you to configure your Technicolor Gateway and helps you to connect your
computers to the Technicolor Gateway. For more information, see
“2 Guided Installation” on page 13
.
The
Technicolor Gateway GUI
allows you to configure your Technicolor Gateway via your web browser.
For more information, see
“4.1 Technicolor Gateway GUI” on page 28
.
Page 34 / 94
28
4 CONFIGURATION TOOLS
DMS-CTC-20101206-0009 v1.0
4.1
Technicolor Gateway GUI
Introduction
The Technicolor Gateway Graphical User Interface (GUI) allows you to configure your Technicolor Gateway using your web
browser.
Requirements
JavaScript must be enabled on your browser (this is the default setting). For more information, consult the help of your web
browser.
Page 35 / 94
29
4 CONFIGURATION TOOLS
DMS-CTC-20101206-0009 v1.0
4.1.1
Access
Accessing the Technicolor Gateway GUI
Proceed as follows:
1
Open your web browser.
2
Browse to http://dsldevice.lan
or to the IP address of your Technicolor Gateway (by default:
192.168.1.254).
3
If you have protected your Technicolor Gateway with a user name and password, the Technicolor Gateway will prompt
you to enter these. Enter your user name and password and click
OK
.
4
The
Technicolor Gateway GUI
appears.
Access the Technicolor Gateway via UPnP
You can also access the Technicolor Gateway GUI using the Internet Gateway Device (IGD) icon if your computer runs one
of the following operating systems:
Microsoft Windows 7
Microsoft Windows Vista
Microsoft Windows XP
For more information, see
“8.1 UPnP” on page 60
.
Remote access
It is also possible to access the Technicolor Gateway GUI from the Internet. For more information, see
“4.3 Access From the
Internet” on page 34
.
For more information, see
“4.1.3 Protecting Access to the Technicolor Gateway” on page 32
.
19216811.live