1. Home
    2. /
  2. Manuals
    3. /
  3. Technicolor
    4. /
  4. Technicolor TG587nv3 BigPond
    5. /
  5. 5
Page 21 / 98 Scroll up to view Page 16 - 20
15
2 GUIDED INSTALLATION
DMS-CTC-20101206-0017 v2.0
2
Guided Installation
Introduction
In the guided installation, the Setup wizard on the Setup CD will assist you with the installation of your Technicolor Gateway.
If you do not want to use the Setup CD or if the Setup CD is not included in your package, follow the installation procedure
described in
“3 Manual Installation” on page 17
.
Requirements
To use the guided installation you must comply with the following requirements:
Your computer must run one of the following operating systems:
Microsoft Windows 7 and higher
Microsoft Windows 7 x64 and higher
Microsoft Windows Vista and higher
Microsoft Windows XP Service Pack 2 (SP2) and higher
Mac OS X 10.6 (Snow Leopard)
Mac OS X 10.5 (Leopard)
Mac OS X 10.4 (Tiger)
You must have administrative rights on your computer.
If you do not comply with these requirements, use the
“3 Manual Installation” on page 17
.
Running the Setup wizard
To start the Setup wizard:
1
Insert the Setup CD into your computer's CD- or DVD drive.
2
If your computer runs:
Microsoft Windows: The Setup CD starts automatically.
If the Setup CD does not autostart, see
“The Setup CD does not start automatically” on page 84
.
Mac OS X: Double-click
Menu
in the window with the content of the Setup CD.
3
Select the language of your choice and click
OK
.
4
The Setup wizard will now guide you through the installation of your Technicolor Gateway.
5
At the end of the installation, the following screen appears:
Select
Go to the Technicolor Gateway web interface
if you want to go to the
Technicolor Gateway GUI
after closing the
wizard. On the
Technicolor Gateway GUI
, you can configure all services of your Technicolor Gateway.
Page 22 / 98
16
2 GUIDED INSTALLATION
DMS-CTC-20101206-0017 v2.0
6
Click
Finish
.
7
The
CD menu
appears.
CD Menu
On the
CD Menu
, you can click:
Initial Setup
to connect your computer to the Technicolor Gateway and configure your local network.
Reconfigure my Technicolor Gateway
to fully reconfigure your Technicolor Gateway.
Setup my computer
to connect your computer to the Technicolor Gateway network.
Documentation
to view a list of the documentation that is available for your Technicolor Gateway.
Visit technicolor.com
to visit the online support sections.
In case of problems
If you encounter problems during this installation please refer to
“10.1 Setup Troubleshooting” on page 84
.
Backup your configuration
Once you successfully installed your Technicolor Gateway, it is recommend to backup your configuration. This will allows
you to return to this configuration when needed (for example, after misconfiguration).
For more information, see
“4.2 Backing Up/Restoring your Configuration” on page 37
If you reconfigure your Technicolor Gateway via the
CD menu
, the Technicolor Gateway will be reconfigured
from scratch. All your current settings will be lost. If you only want to make small changes to your configuration
(for example, changing the security), we recommended you to do this via the
Technicolor Gateway GUI
. For more
information, see
“4.1 Technicolor Gateway GUI” on page 32
.
Actual available items depend on the Setup CD delivered with your Technicolor Gateway.
Page 23 / 98
17
3 MANUAL INSTALLATION
DMS-CTC-20101206-0017 v2.0
3
Manual Installation
Installation
This chapter will help you to manually install your Technicolor Gateway.
Setting up your network
Proceed as follows:
1
Connect your Technicolor Gateway to your service provider’s network.
For more information, see
“3.1 Connecting the Technicolor Gateway to your Service Provider’s Network” on page 18
.
2
Power on the Technicolor Gateway.
For more information, see
“3.2 Powering on the Technicolor Gateway” on page 22
.
3
Connect your computer to the Technicolor Gateway.
For more information, see
“3.3 Connecting Your Network Devices to the Technicolor Gateway” on page 23
.
4
Configure your Technicolor Gateway.
For more information, see
“3.4 Configure the Technicolor Gateway” on page 26
.
5
Share your content or media on your local network, continue with
“7 Sharing Content” on page 49
.
6
If you purchased the mobile USB adapter, setup the 3G backup connection.
For more information, see
“3.5 Setting Up the 3G Fall-Back WAN Connection” on page 27
.
7
Once you successfully installed your Technicolor Gateway, it is recommend to backup your configuration. This will allows
you to return to this configuration when needed (for example, after misconfiguration). For more information, see
“4.2 Backing Up/Restoring your Configuration” on page 37
.
Page 24 / 98
18
3 MANUAL INSTALLATION
DMS-CTC-20101206-0017 v2.0
3.1
Connecting the Technicolor Gateway to your Service
Provider’s Network
Identifying your setup
If you are using the Technicolor Gateway as:
DSL Gateway
, continue with
“3.1.1 Setting up your Technicolor Gateway as DSL Gateway” on page 19
.
Local Router
, continue with
“3.1.2 Setting up your Technicolor Gateway as Local Router” on page 21
.
For more information, see
“1.2 User Scenarios” on page 5
, you can use your Technicolor Gateway in either of the following
scenarios
Page 25 / 98
19
3 MANUAL INSTALLATION
DMS-CTC-20101206-0017 v2.0
3.1.1
Setting up your Technicolor Gateway as DSL Gateway
Introduction
This section helps you to connect the Technicolor Gateway to your service provider’s network.
Signal arriving at your home
The
Line
signal that arrives at your home consists the following components:
A
Phone
signal carrying the traffic for telephony.
A
DSL
signal carrying the Internet traffic.
DSL Gateways have a built-in solution to remove the
Phone
component. No additional devices are needed, you can
connect them directly to the
Line
.
Telephones do not have this capability, so here you have to use a filter or splitter to remove the
DSL
signal.
What does a filter/splitter look like
A splitter/filter is a box that typically has the following connectors:
A
Line
input
This connector must be connected to the input signal that needs to be filtered.
A
Phone/PSTN
output
This connector offers filtered output signal. It only contains the
Voice
component and can only be used for connecting
phones.
A
Modem/DSL
output (optional)
This connector offers unfiltered output. It contains both the
Phone
and
DSL
signal and can be used to connect your
Technicolor Gateway.
This
Phone
signal is only used for communication over the traditional telephone network (PSTN). Voice over IP
communication will be carried by the
DSL
signal.
DSL
+
Voice
Voice
DSL
+
Voice
Service
Provider
Filter/Splitter
LINE
PHONE
MODEM

Rate

4 / 5 based on 1 vote.

Popular Technicolor Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top