Page 31 / 91 Scroll up to view Page 26 - 30
Page
31
/
91
Gateway
Network Web Page Group
1. LAN
You can activate the DHCP server function for the LAN on this page.
With this function activated,
y
our cable company’s DHCP server provides one IP address for your gateway,
a
nd your gateway’s DHCP server provides IP addresses, star
ting at the address you set in IP
Address on the LAN page, to your PCs. A DHCP server leases an IP address with an expiration
time.
To change the IP address that your gateway will use on the LAN side, enter it into the
IP Address
box
and then click
Apply
.
IP Address and Subnet Mask:
A private IP address and Subnet Mask for LAN sub netting.
For example 192.168.0.1./ 255.255.255.0.
DHCP Server:
Select the check point of “Yes” or “No” to enable or disable a simple DHCP server for LAN.
Configure the IP address
numbers for the DHCP server with “
Lease pool start
” and “
Lease pool
end
”.
Configure the IP address lease time with “
Lease time
” for DHCP server. Default value is
604800
seconds.
Fig. 2-13 Gateway\Network\LAN
Page 32 / 91
Page
32
/
91
2. WAN
You can configure the optional internal DHCP server for the WAN on this page. This can be required by
some ISP providers.
Select different WAN Connection Type will lead to different contents. Take the WAN connection type-
DHCP for example, you can release and renew the WAN lease by pressing the buttons.
You can enter a spoofed MAC address that causes your gateway networking stack to use that MAC
address when communicating instead of the usual WAN MAC address, e.g., if the MAC address is
00:10:18:de:ad:03
, this spoofed MAC address could be
00:11:e3:df:ad:05
or any desired MAC address.
Fig.2-14 Gateway\Network\WAN
Page 33 / 91
Page
33
/
91
3. Computers
This page displays the status of the DHCP clients and current system time. You can cancel an IP address
lease by selecting it in the DHCP Client Lease Info list and then clicking the Force Available button. If
you do so, you may have to perform a DHCP Renew on that PC, so that it can obtain a new lease.
Fig.2-15 Gateway\Network\Computers
Page 34 / 91
Page
34
/
91
4. DDNS - Dynamic DNS service
This page allows to setup for Dynamic DNS server.
Fig.2-16 Gateway\Network\DDNS
DDNS Service
- Choose Enabled ( www.DynDNS.org ) to enable the basic setting. Choose Disabled
to close the basic setting.
Username
- The username that you registered with your DDNS provider.
Password
- The password that you registered with your DDNS provider
Host Name
- The domain name or host name that is registered with your DDNS provider
Status
- It shows the DDNS service status whether it is enabled or disabled.
Click Apply to save the changes.
Page 35 / 91
Page
35
/
91
5. Time
This page allows configuration and display of the system time obtained from network servers via Simple
Network Time Protocol. The system has to be reset for any changes to take effect.
Fig.2-17 Gateway\Network\Time

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top