Page 21 / 40
Scroll up to view Page 16 - 20
ALTERA-04G
19
3.5.4 DDNS
Go to
Access Management -> DDNS
to setup your DDNS parameters. Dynamic DNS allows you to
update your dynamic IP address with one or many dynamic DNS services. So anyone can access
your FTP or Web service on your computer using DNS-like address.
Page 22 / 40
ALTERA-04G
20
3.6.1 LAN Configuration
Go to Interface
Setup -> LAN
. The 'LAN Settings' option enables you to configure the LAN port.
If the DHCP Relay is selected, the DHCP requests from local PCs are forward to the DHCP server
runs on WAN side. To have this function working properly, disable the NAT to run on router mode
only, disable the DHCP server on the LAN port, and make sure the routing table has the correct
routing entry.
Page 23 / 40
ALTERA-04G
21
3.7.1 Wireless Settings
Go to
Interface -> Wireless
to setup the wireless parameters.
SSID
The identifier for the network. You can change the SSID. Only devices with the same SSID can
interconnect.
Channel ID
The channel number is used for wireless networking. The channel setting of the wireless devices
within a network should be the same.
Page 24 / 40
ALTERA-04G
22
3.7.2 Wireless Security
Go to
Interface -> Wireless
to setup the wireless security.
The Authentication type supports “shared key WEP 64bits", "shared key WEP 128bits”, “WPA-PSK”.
Page 25 / 40
ALTERA-04G
23
3.8.1 IP Filtering
Go to
Access Management -> IP Filter
to block some packets form WAN.
The router provides extensive firewall protection by restricting connection parameters to limit the risk
of intrusion and defending against a wide array of common hacker attacks.
“Block WAN Scan” allow you to prevent the hackers from testing the services of the router. To add IP
filtering rules to block certain packet from WAN.
19216811.live