Page 11 / 90
Scroll up to view Page 6 - 10
- 10 -
Note:
When connection 2 is used, the filter must be installed close to the telephone
cable. See Figure2. Do not use the splitter to replace the filter.
Installing a telephone directly before the splitter may lead to failure of connection
between the device and the central office, or failure of Internet access, or slow
connection speed. If you really need to add a telephone set before the splitter, you
must add a microfilter before a telephone set. Do not connect several telephones
before the splitter or connect several telephones with the microfilter.
Page 12 / 90
- 11 -
3
Web Configuration
This chapter describes how to configure the router by using the Web-based
configuration utility.
3.1
Access the Router
The following is the detailed description of accesing the router for the first time.
Step 1
Open the Internet Explorer (IE) browser and enter
.
Step 2
In the
Login
page that is displayed, enter the username and password.
°
The username and password of the super user are
admin
and
admin
.
°
The username and password of the common user are
user
and
user
.
If you log in as a super user, the page shown in the following figure appears. You
can check, configure and modify all the settings.
Page 13 / 90
- 12 -
If you log in as a common user, you can check the status of the router, but can not
configure the most of the settings.
Note:
In the Web configuration page, you can click
Apply Changes
to save the
settings temporarily. If you want to save the settings of this page permanently,
click
save
of
Attention
that appears at the bottom of the Web page after the
configuration.
3.2
Status
In the navigation bar, choose
Status
.
In the
Status
page that is displayed contains:
System, LAN, WLAN, WAN, Port Mapping, Statistics and ARP Table.
3.2.1
System
Choose
Status
>
System
. The page that is displayed shows the current status and
some basic settings of the router, such as
software version
,
DSP version
,
uptime
,
upstream speed
and
downstream speed
.
Page 14 / 90
- 13 -
3.2.2
LAN
Choose
Status
>
LAN
. The page that is displayed shows some basic LAN settings
of the router. In this page, you can view the LAN IP address, DHCP server status,
MAC address and DHCP client table. If you want to configure the LAN network,
refer to chapter 3.4.1.1 LAN IP.
3.2.3
WLAN
Choose
Status
>
WLAN
. The page that is displayed shows some basic settings of
wireless LAN (WLAN).
Page 15 / 90
- 14 -
3.2.4
WAN
Choose
Status
>
WAN
. The page that is displayed shows some basic WAN
settings of the router. In this page, you can view basic status of WAN and DNS
server. If you want to configure the WAN network, refer to chapter 3.4.2.1 WAN.
19216811.live