Page 211 / 249
Scroll up to view Page 206 - 210
USB
206
Figure 10-8
Select
A network printer, or a printer attached to another computer
and click
Next
.
Figure 10-9
Select
Browse for a printer
and click
Next
.
Page 212 / 249
USB
207
Figure 10-10
Locate the CyberGuard SG appliance by expanding your Windows workgroup and
locating the CyberGuard SG by its hostname.
The hostname is set on the CyberGuard
SG appliance under
Network Setup
->
Advanced
->
Unit Hostname
.
Select the
printer and click
Next
.
You may receive a warning about the CyberGuard SG appliance automatically installing
print drivers on your PC.
Ignore it, the CyberGuard SG will not install print drivers
automatically.
If a dialog will be displayed to inform you that no appropriate print driver could be found
on the CyberGuard SG appliance, click
OK
.
Figure 10-11
Select the appropriate driver for your printer.
Page 213 / 249
USB
208
If an appropriate printer driver is not already installed on the Windows PC, you will need
the floppy disk or CD that shipped with your printer, or to download the appropriate
drivers from the manufacturer’s website (you may have to extract this if it is in a
compressed archive or
.exe
format).
If you are using a floppy disk or CD, insert it now.
Click
Have Disk
.
Enter the location of the print drivers in
Copy manufacturer’s files
from
(e.g.
A:
for a floppy or
D:
for a CD, or the locate where you downloaded or extracted
the drivers) and click
Browse
.
Figure 10-12
Locate the
.inf
file for your printer and click
Open
then
OK
.
Page 214 / 249
USB
209
Figure 10-13
Select your printer model and click
OK
.
If your printer model is not listed, click
Have Disk
and
Browse
again.
Drivers for several
different printers and different operating systems are often distributed together by the
manufacturer, so there may by several different
.inf
files.
Follow the onscreen instructions to install the printer driver.
This will vary from printer to
printer.
Note
If you cannot locate the appropriate
.inf
file or the printer driver fails to install, see
Print
driver installation fails
in the
Printer Troubleshooting
section.
Choose whether to use this printer as the default printer for this Windows PC and click
Next
.
Click
Finish
.
To test the printer, printing a simple text document from Notepad, or right click the printer
in
Printers and Faxes
, click
Properties
then click
Print Test Page
.
Page 215 / 249
USB
210
LPR / LPD setup
Note
This information is generally not relevant for Windows network environments.
Once the print server has been set up, the CyberGuard SG appliance also listen on the
standard LPR / LPD network port (TCP 515) for incoming print jobs.
Set up your LPR client to print to a remote LPD queue as specified by your operating
system’s documentation.
The queue name is the
Name
you specified during
Set up print
server
.
Printer Troubleshooting
This section lists some common issues and steps you can take to resolve them.
If none of these address your issue, consult the CyberGuard SG Knowledge Base at:
The Knowledge Base also contains information on getting specific printers to interoperate
with the CyberGuard SG’s print server.
Print driver installation fails
If you are unable to install the remote printer, attach it directly to the Windows PC and
follow the manufacturer’s instructions to install it as if it were a local printer.
Once the printer has installed, reconnect it to the CyberGuard SG unit and follow the
instructions from the
Set up print server
section onwards.
When you are prompted to
select the print driver in the
Add Printer Wizard
, the driver for your printer should now be
listed under the manufacturer.
After the wizard has completed, you may delete the local printer.