1. Home
    2. /
  2. Manuals
    3. /
  3. SMC
    4. /
  4. SMCWBR14S-N3
    5. /
  5. 16
Page 76 / 106 Scroll up to view Page 71 - 75
System Configuration
5-42
5
System Security
The wireless AP/Router includes the facility to manage it from a remote location.
The unit can also be sent a ping message from a remote location.
Figure 5-31.
System Security Settings
•
Remote Management
– Denies or allows a remote access via WAN. (Default:
Deny)
•
Ping from WAN Filter
– Sends a ping request on the WAN port to test for
connectivity. (Default: Disable)
•
Stateful Packet Inspection (SPI)
– The Stateful Packet Inspection (SPI) firewall
protects your network and computers against attacks and intrusions. A stateful
packet firewall looks at packet contents to check if the traffic may involve some type
of security risk. (Default: Disable)
Page 77 / 106
Firewall
5-43
5
Content Filtering
The wireless AP/Router provides a variety of options for blocking Internet access
based on content, URL and host name.
Figure 5-32.
Filter Settings
Webs Content Filter Settings
— The wireless AP/Router blocks access to
specific traffic such as proxies, Java Applets and ActiveX. Check the box for
whichever service to be blocked then click “Apply”.
•
Filter
– Selects Webs content filters. (Options: Proxy/Java/ActivX)
Page 78 / 106
System Configuration
5-44
5
Current Web URLs Filters
— By filtering inbound Uniform Resource Locators
(URLs) the risk of compromising the network can be reduced. URLs are commonly
used to point to websites. By specifying a URL or a keyword contained in a URL
traffic from that site may be blocked.
•
Current URL Filters
– Displays current URL filter.
•
Add URL Filter
– Adds a URL filter to the settings. For example,
myhost.example.com.
Current Website Host Filters
— The wireless AP/Router allows Internet content
access to be restricted based on web address keywords and web domains. A
domain name is the name of a particular web site. For example, for the address
www.FUNGAMES.com, the domain name is FUNGAMES.com. Enter the Keyword
then click “Add”.
•
Current Host Filters
– Displays current Host filter.
•
Add Host (Keyword) Filter
– Enters the keyword for a host filtering.
Administration Settings
The wireless AP/Router’s Administration Settings menu provides the same
configuration options in both Gateway and Bridge Mode. These settings allow you to
configure a management access password, set the system time, upgrade the
system software, display the system status and statistics.
System Management
Figure 5-33.
System Management Settings
Page 79 / 106
Administration Settings
5-45
5
Language Settings
You can change the language displayed in web interface. Chooses the appropriate
language of your choice from the drop-down list, then click “Apply”. (Options:
English/Traditional Chinese/Simplified Chinese. Default: English)
Administrator Settings
To protect access to the management interface, you need to configure a new
Administrator’s user name and password as soon as possible. If a new user name
and password are not configured, then anyone having access to the wireless AP/
Router may be able to compromise the unit's security by entering the default values.
Once a new Administrator has been configured, you can delete the default “admin”
user name from the system.
• Username
– The name of the user. The default names preset for access to the unit
is “admin”. (Length: 3-16 characters, case sensitive)
• Password
– The password for management access. The default password preset
for access to the unit is “smcadmin” (Length: 3-16 characters, case sensitive)
•
Confirm Password
– Prompts you to enter the password again for verification.
NTP Settings
The System Management page allows you to manually configure time settings or
enable the use of an Network Time Protocol (NTP) server.
Figure 5-34.
NTP Settings
•
Date Time Set By
– Allows you to manually configure time settings or select the
use of an NTP server.
•
Time Zone
– Specifies the time zone in Greenwich Mean Time (GMT).
•
NTP Server Primary/Secondary
– The IP address or URL of the NTP server to
be used.
Page 80 / 106
System Configuration
5-46
5
Green AP Settings
The GreenAP feature is used for reducing the wireless AP/Router's power
consumption. Before setting the Green AP duration, you need to configure the NTP
settings first, then choose one of the options from Action drop-down list. The WiFi Tx
Power indicates how much antenna power you want to use. Less power means the
wireless AP/Router can only cover a shorter range. The final step is to set the
GreenAP duration. For example, you might set the TxPower 25% during your
sleeping hours, or TxPower OFF while you are away.
Figure 5-35.
Green AP Settings
DDNS Settings
Dynamic DNS (DDNS) provides users on the Internet with a method to tie a specific
domain name to the unit’s dynamically assigned IP address. DDNS allows your
domain name to follow your IP address automatically by changing your DNS records
when your IP address changes.
The wireless AP/Router provides access to three DDNS service providers,
DynDns.org, Non-IP.com and ZoneEdit.com. To set up an DDNS account, visit the
websites of these service providers at www.dyndns.org, www.non-ip.com, or
www.zoneedit.com.
Figure 5-36.
DDNS Setting (Gateway Mode)

Rate

4 / 5 based on 1 vote.

Popular SMC Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top