1. Home
    2. /
  2. Manuals
    3. /
  3. SMC
    4. /
  4. SMC8014WG-TWC
    5. /
  5. 3
Page 11 / 60 Scroll up to view Page 6 - 10
Configuring Windows 2000
1.
Access your Network settings by clicking
[Start], choose [Settings], and then
select [Control Panel]
2.
In the Control Panel, locate and double-
click the [Network and Dial-up
Connections] icon
3.
Locate and double-click the [Local Area
Connection] icon for the Ethernet
adapter that is connected to the
Gateway. When the Status dialog box
window opens, click the [Properties]
button.
4.
On the [Local Area Connection]
Properties box, verify the box next to
Internet Protocol (TCP/IP) is checked.
Then highlight the Internet Protocol (TCP/IP), and click the Properties button.
5.
Select Obtain an IP address automatically to configure your computer for DHCP. Click
the [OK] button to save this change and close the Properties window.
6.
Click the [OK] button again to save these new changes.
7.
Reboot your PC.
Configuring Windows XP
The following instructions assume you are running Windows XP with the default interface. If
you are using the Classic interface (where the icons and menus look like previous Windows
versions), please follow the instructions for Windows 2000 outlined above.
1.
Access your Network settings by
clicking [Start], choose [Control
Panel], select [Network and Internet
Connections] and then click on the
[Network Connections] icon.
2.
Locate and double-click the Local
Area Connection icon for the Ethernet
adapter that is connected to the
Gateway. Next, click the [Properties]
button.
3.
On the [Local Area Connection]
Properties box, verify the box next to
Internet Protocol (TCP/IP) is checked.
Then highlight the Internet Protocol
(TCP/IP), and click the Properties
button.
4.
Select Obtain an IP address automatically to configure your computer for DHCP. Click
the [OK] button to save this change and close the Properties window.
5.
Click the [OK] button again to save these new changes.
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 60
6.
Reboot your PC.
Configuring a Macintosh Computer
You may find that the instructions here do not exactly match your screen. This is because these
steps and screen shots were created using Mac OS 10.2. Mac OS 7.x and above are all very
similar, but may not be identical to Mac OS 10.2.
1.
Pull down the Apple Menu. Click System Preferences and select Network. Make sure
that
2.
Built-in Ethernet is selected in the Show field.
3.
On the TCP/IP tab, select Using DHCP in the Configure field.
4.
Close the TCP/IP dialog box.
Downloaded from
www.Manualslib.com
manuals search engine
Page 13 / 60
CHAPTER 5 | Configuring the EZ Connect™ Wireless Cable Modem
Gateway
After you have configured TCP/IP on a client computer, use a web browser to configure the EZ
Connect™ Wireless Cable Modem Gateway. The Gateway can be configured by any Java-
supported browser including Internet Explorer 5.0 or above, or Netscape Navigator 5.0 or
above. Using the web management interface, you can configure the Gateway features and view
its settings.
Before you attempt to log into the Gateway’s Web-based Administration, please verify the
following:
1.
Your browser is configured properly. (see below)
2.
Disable any firewall or security software that may be running.
3.
Confirm that you have a [link] LED where your computer is plugged into the Gateway.
If you don’t have a [link] light, try another cable.
Browser Configuration
Confirm your browser is configured for a direct connection to the Internet using the Ethernet
cable that is installed in the computer. This is configured through the options/preference section
of your browser.
Disable Proxy Connection
You will also need to verify that the “HTTP Proxy” feature of your web browser is disabled. This
is so that your web browser will be able to view the web-based configuration pages. The
following steps are for Internet Explorer and for Netscape. Determine which browser you use and
follow the appropriate steps.
Internet Explorer (5.0 or above)
1.
Open Internet Explorer. Click [Tools], and then select [Internet Options].
2.
In the [Internet Options] window, click the [Connections] tab.
3.
Click the [LAN Settings] button.
4.
Clear all the check boxes and click [OK] to save these LAN settings changes.
5.
Click [OK] again to close the [Internet Options] window.
NOTE
: To ensure proper screen refresh after a command entry, be sure that Internet Explorer
5.0 is configured as follows: Under the menu “Tools/Internet Options/General/Temporary
Internet Files/Settings,” the setting for “Check for newer versions of stored pages” should be
“Every visit to the page.”
Netscape (5.0 or above)
1.
Open Netscape. Click [Edit], and then select [Preferences].
2.
In the [Preferences] window, under [Category], double-click [Advanced], then select
the [Proxies] option.
3.
Check [Direct connection to the Internet].
4.
Click the [OK] button to save the changes.
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 60
Accessing the EZ Connect™ Wireless Cable Modem Gateway’s Web Management
To access the EZ Connect™ Wireless Cable Modem Gateway’s web-based management screens,
follow the steps below:
1.
Launch your web-browser.
NOTE
: Your computer does not have to be ONLINE to configure the EZ Connect™
Wireless Cable Modem Gateway.
2.
In the Address Bar, type: http://192.168.0.1
3.
When the Gateway’s Login screen appears, enter the default username and password,
and click the [Login] button to access the Gateway.
There are 2 default login accounts, one for the User and one for the Installer:
Installer Login – for use by cable operator only
USERNAME: mso
PASSWORD: msopassword
User Login – for use by subscriber
USERNAME: cusadmin
PASSWORD: password
NOTE
: Usernames and Passwords are case sensitive
4.
Once you have logged into the Gateway’s web-based admin screen, you have several
options and features which can be configured.
All features available and how to configure each one is outlined in the next section
Chapter 6 | Navigating the Web-based Administration.
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 60
CHAPTER 6 | Navigating the Web-based Administration
The EZ Connect™ Wireless Cable Modem Gateway’s management interface allows you to
configure both basic and advanced features and options. Some of these advanced functions
include: hacker attack detection, IP and MAC address filtering, intrusion detection, port
forwarding setup, virtual DMZ hosts, as well as other advanced functions.
Making Configuration Changes
Once a configuration change has been made on a page, be sure to click the [Apply] or [Next]
button at the bottom of the page to enable the new setting.
SYSTEM
This section is used to configure the device mode and administration options including
passwords and remote management settings.
To access the System Settings configuration page, on the Side Navigation bar, click on [System]
link.
Selecting the [Disable ALL Commercial Gateway Functions] sets the Gateway to operate as a
bridging cable modem.
In this mode all LAN interfaces are enabled including Ethernet, USB,
and Wireless, but all Gateway functions are disabled including Firewall, NAT, DHCP Server, URL
Blocking, and VPN end points.
A Router Name for the Gateway can also be set on this page.
Password Settings
From this section you can configure new passwords for the [mso] and [cusadmin] administrator
accounts.
You can also set the Idle Time Out value that the SMC8014W-G will keep an admin account
logged in for.
The default Idle Time Out value is 10 min.
To access the Password Settings configuration page, on the Side Navigation bar, click on
[System] link and then click on the [Password Settings] link.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Popular SMC Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top