Page 126 / 131
Scroll up to view Page 121 - 125
ADSL C
ABLE
B-5
ADSL Cable
Use standard telephone cable to connect the RJ-11 telephone wall outlet to
the RJ-11 ADSL port on the ADSL Router.
Caution:
Do not plug a phone jack connector into an RJ-45 port.
Specifications
Wiring Conventions
For ADSL connections, a cable requires one pair of wires. Each wire is
identified by different colors. For example, one wire might be red and the
other, red with white stripes. Also, an RJ-11 connector must be attached to
both ends of the cable.
Each wire pair must be attached to the RJ-11 connectors in a specific
orientation. The following figure illustrates how the pins on the RJ-11
connector are numbered. Be sure to hold the connectors in the same
orientation when attaching the wires to the pins.
Figure B-2.
RJ-11 Connector Pin Numbers
Cable Types and Specifications
Cable
Type
Connector
ADSL Line
Standard Telephone Cable
RJ-11
Page 128 / 131
C-1
A
PPENDIX
C
S
PECIFICATIONS
Physical Characteristics
Ports
Four 10/100Mbps RJ-45 ports
One ADSL port (RJ-11)
ADSL Features
Supports DMT line modulation
Supports Annex A Full-Rate ADSL: up to 8 Mbps downstream, up to
1 Mbps upstream (G.992.1 &T1.413, Issue 2) and ADSL2 (G.992.3) and
ADSl2+ (G.992.5)
Supports G.Lite ADSL: up to 1.5 Mbps downstream, up to 512 Kbps
upstream
Dying GASP support
ATM Features
RFC1483 Encapsulation (IP, Bridging and encapsulated routing)
PPP over ATM (LLC &VC multiplexing) (RFC2364)
Classical IP (RFC1577)
Traffic shaping (UBR, CBR)
OAM F4/F5 support
PPP over Ethernet Client
Management Features
Firmware upgrade via web based management
web based management (configuration)
Power Indicators
Event and History logging
Network Ping
Traceroute
Page 129 / 131
S
PECIFICATIONS
C-2
Security Features
Password protected configuration access
User authentication (PAP/CHAP) with PPP
Firewall NAT NAPT
VPN pass through (IPSec-ESP Tunnel mode,L2TP, PPTP)
LAN Features
IEEE 802.1D (self-learning transparent Bridging)
DHCP Server
DNS Proxy
Static Routing, RIPv1 and RIP
Temperature:
IEC 68-2-14
0 to 40 degrees C (Standard Operating)
-40 to 70 degree C (Non-operation)
Humidity
10% to 90% (Non-condensing)
Vibration:
IEC 68-2-36, IEC 68-2-6
Shock:
IEC 68-2-29
Drop:
IEC 68-2-32
Dimensions:
143mm(L) x 94mm(D) x 32mm(H)
Weight:
500 g
Input Power:
15 V 0.8A
IEEE Standards
IEEE 802.3, 802.3u, 802.11g, 802.1D , 802.11 n draft
ITU G.dmt, ITU G.Handshake, ITU T.413 issue 2 - ADSL full rate
Standards Conformance Electromagnetic Compatibility
CE, ETSI,
R&TTE, FCC part 15 class B & FCC part 68
Safety
EN 60950-1
Page 130 / 131
S
PECIFICATIONS
C-3
Wireless Frequency Band
802.11b/g/n Radio: 2.4 GHz
USA - FCC
2412~2462 MHz (Ch1~Ch11)
Europe - ETSI
2412~2472 MHz (Ch1~Ch13)
France
2457~2472 MHz (Ch10~Ch13)
Modulation Technology: DSSS/OFDM
Operating Channels:
IEEE 802.11b compliant:
11 channels (US, Canada)
13 channels (ETSI)
4 channels (France)
IEEE 802.11g compliant:
11 channels (US, Canada)
13 channels (Europe)
IEEE draft 802.11n 20MHz compliant:
11 channels (US, Canada)
13 channels (Europe)
IEEE draft 802.11n 40MHz compliant:
7 channels (US, Canada)
9 channels (Europe)
Signal Type: DSSS/OFDM
Operating Frequency: 2.412 - 2.462GHz
19216811.live