Page 111 / 131
Scroll up to view Page 106 - 110
C
ONFIGURING
THE
B
ARRICADE
4-76
Configuration Tools
Choose a function and click
Next
.
•
Backup Router Configuration: this allows you to save the Barricade’s
configuration to a file.
•
Restore from saved Configuration file: this function is used to restore
the previously saved backup configuration file.
•
Restore router to Factory Defaults: this resets the Barricade back to the
original default settings.
Page 112 / 131
C
ONFIGURATION
PARAMETERS
4-77
Firmware Upgrade
Use this screen to update the firmware or user interface to the latest
versions.
1.
Download the upgrade file from the SMC web site first, and save it to
your hard drive.
2.
Then click
Browse...
to look for the downloaded file. Click
BEGIN
UPGRADE
.
Check the Status screen Information section to confirm that the upgrade
process was successful.
Page 113 / 131
C
ONFIGURING
THE
B
ARRICADE
4-78
Reset
Click
REBOOT ROUTER
to reset the Barricade. The reset will be
complete when the power LED stops blinking.
If you perform a reset from this screen, the configurations will not be
changed back to the factory default settings.
Note:
If you use the Reset button on the back panel, the Barricade
performs a power reset. If the button is pressed for over
10 seconds, all the LEDs will illuminate and the factory default
settings will be restored.
Page 114 / 131
C
ONFIGURATION
PARAMETERS
4-79
Status
The Status screen displays WAN/LAN connection status, firmware, and
hardware version numbers, illegal attempts to access your network, as well
as information on DHCP clients connected to your network. The security
log may be saved to a file by clicking
Save
and choosing a location.
Scroll down to view more information on the Status screen.
19216811.live