Page 21 / 69
Scroll up to view Page 16 - 20
E
|
3
Internet Status
This page displays whether the WAN port is connected to a Cable/DSL
connection. It also displays the router’s WAN IP address, Subnet Mask, and ISP
Gateway as well as MAC address, the Primary DNS. Press
Renew
button to
renew your WAN IP address.
Page 22 / 69
E
|
3
DHCP Client Status
DHCP
This page shows all DHCP clients (LAN PCs) currently connected to your
network. The table shows the assigned IP address, MAC address and expiration
time for each DHCP leased client. Use the Refresh button to update the available
information.
You can check
Enable Static DHCP IP
. It is possible to add more static DHCP
IPs. They are listed in the table
Current Static DHCP Table
. IP can be deleted
at will from the table.
Click the
Apply
button to save the changed configuration.
Page 23 / 69
E
|
3
WLR-5000 Log
View the operation log of the WLR-5000. This page shows the current system log
of the Broadband router. It displays any event occurred after system start up. At
the bottom of the page, the system log can be saved
<Save>
to a local file for
further processing or the system log can be cleared
<Clear>
or it can be
refreshed
<Refresh>
to get the most updated information. When the system is
powered down, the system log will disappear if not saved to a local file.
Page 24 / 69
E
|
3
WLR-5000 Statistics
Shows the counters of packets sent and received on WAN, LAN & WLAN.
Page 25 / 69
E
|
3
11 Configuration Wizard
Click
Wizard
to configure the router. The Setup wizard will now be displayed;
check that the modem is connected and click
Next.
Select your country from the Country list. Select your internet provider. Click
Next.
Depending on the chosen provider, you may need to enter your user name
and password, MAC address or hostname in the following window. After you
have entered the correct information, click
Next
.
19216811.live