Page 41 / 65
Scroll up to view Page 36 - 40
41
Denial of Service (DoS)
The Broadband router's firewall can block common hacker attacks, including
Denial of Service, Ping of Death, Port Scan and Sync Flood. If Internet attacks
occur the router can log the events.
Ping of Death
Protections from Ping of Death attack
Discard Ping From WAN
The router’s WAN port will not respond to any Ping
requests
Port Scan
Protects the router from Port Scans.
Sync Flood
Protects the router from Sync Flood attack.
Page 42 / 65
42
Access
You can restrict users from accessing certain Internet applications/services
(e.g. Internet websites, email, FTP etc.), Access Control allows users to define
the traffic type permitted in your LAN. You can control which PC client can
have access to these services.
Deny
If you select “Deny” then all clients will be allowed to access Internet
accept for the clients in the list below.
Allow
If you select “Allow” then all clients will be denied to access Internet
accept for the PCs in the list below.
Filter client PCs by IP
Fill in “IP Filtering Table” to filter PC clients by IP.
Add PC
You can click Add PC to add an access control rule for users by IP
addresses.
Remove PC
If you want to remove some PCs from the "IP Filtering Table",
select the PC you want to remove in the table and then click “Delete
Page 43 / 65
43
Selected". If you want to remove all PCs from the table, just click the "Delete
All" button.
Filter client PC by MAC
Check “Enable MAC Filtering” to enable MAC
Filtering.
Add PC
Fill in “Client PC MAC Address” and “Comment” of the PC that is
allowed to access the Internet, and then click “Add”. If you find any typo
before adding it and want to retype again, just click "Reset" and the fields will
be cleared.
Remove PC
If you want to remove some PC from the "MAC Filtering Table",
select the PC you want to remove in the table and then click "Delete
Selected". If you want to remove all PCs from the table, just click the "Delete
All" button. If you want to clear the selection and re-select again, just click
“Reset”.
Click <
Apply
> at the bottom of the screen to save the above configuration.
Page 44 / 65
44
URL block
You can block access to some Web sites from particular PCs by entering a full
URL address or just keywords of the Web site.
Enable URL
Blocking Enable/disable URL Blocking
Add URL Keyword
Fill in “URL/Keyword” and then click “Add”. You can enter
the full URL address or the keyword of the web site you want to block.
Remove URL Keyword
If you want to remove some URL keywords from the
"Current URL Blocking Table", select the URL keyword you want to remove in
the table and then click "Delete Selected". If you want remove all URL
keywords from the table, just click "Delete All" button. If you want to clear
the selection and re-select again, just click “Reset”.
Click <
Apply
> at the bottom of the screen to save the above configurations
Page 45 / 65
45
14
Advanced Settings
Network Address Translation (NAT) allows multiple users at your local site to
access the Internet through a single Public IP Address or multiple Public IP
Addresses. NAT provides Firewall protection from hacker attacks and has the
flexibility to allow you to map Private IP Addresses to Public IP Addresses for
key services such as Websites and FTP. Select Disable to disable the NAT
function.
19216811.live