Page 21 / 65
Scroll up to view Page 16 - 20
21
Internet Status
This page displays whether the WAN port is connected to a Cable/DSL
connection. It also displays the router’s WAN IP address, Subnet Mask, and ISP
Gateway as well as MAC address, the Primary DNS. Press the
Renew
button to
renew your WAN IP address.
Page 22 / 65
22
DHCP Client Status
This page shows all DHCP clients (LAN PCs) currently connected to your network.
The table shows the assigned IP address, MAC address and expiration time for
each DHCP leased client. Use the Refresh button to update the available
information.
You can check
Enable Static DHCP IP
. It is possible to add more static DHCP
IPs. They are listed in the table
Current Static DHCP Table
. IP can be deleted
at will from the table.
Click
apply
button to save the changed configuration.
Page 23 / 65
23
WLR-4001 Log
View the operation log. This page shows the current system log of the Broadband
router. It displays any event occurred after system start up. At the bottom of the
page, the system log can be saved
<Save>
to a local file for further processing
or the system log can be cleared
<Clear>
or it can be refreshed
<Refresh>
to
get the most updated information. When the system is powered down, the
system log will disappear if not saved to a local file.
Page 24 / 65
24
Statistics
Shows the counters of packets sent and received on WAN, LAN & WLAN.
Page 25 / 65
25
11 Configuration Wizard
Click
Wizard
to configure the router. The Setup wizard will now be displayed;
check that the modem is connected and click
Next.
Select your country from the Country list. Select your internet provider. Click
Next.
19216811.live